AEG 76730 Opening and Closing the Filling Door, Add the washing, Close the filling door securely

Page 22

Operating Instructions

Opening and Closing the Filling Door

0 Open: Pull on the handle of the filling door.

0Close: Press the filling door firmly closed.

The displays DOOR and START/PAUSE show whether the door can be opened while the appliance is switched on:

Display DOOR

Display START/PAUSE

Opening door possible?

Glows green

Flashes red

Yes

Glows green

Glows red

Yes, after pressing button

START/PAUSE

 

 

Is off

Flashes or glows red

No1)

1) The main door is locked because of a high water level or a high temperature.

3

If

 

– the display DOOR flashes red

– then the error code E40 flashes in the multidisplay

– and the display MAIN WASH flashes

you tried to start a washing program without first closing the main door properly. In this case push the door shut firmly and restart the washing program.

Add the washing

3

For the maximum filling quantities, see the "Program tables".

 

See "Sort and prepare washing" for information on correctly preparing

the washing.

01. Sort and prepare the washing according to type.

2.Open the filling door: Pull on the handle of the filling door.

3. Fill with washing.

Important! When closing the door, make sure no items of washing get stuck! This could damage textiles and the unit.

4. Close the filling door securely.

22

Image 22
Contents ÖKO-LAVAMAT 76730 update Please read this user information carefully Tips on using the applianceDear Customer Pass it on to any future owners of the unitContents What to do if Program TablesWarranty conditions / Customer service centres Before Using for the First Time SafetyCorrect Use Safety of Children and Infirm Persons General SafetyDisposing of the Packaging Material DisposalDisposing of your old appliance Environmental tips Front view Unit descriptionDrawer for detergent and care agent Control panel Program SelectorHandwash Main washing cycle for delicates at 30 C or 40 CWOOL/P Handwash Is added, spinWarm pre wash before the main washing cycle Come effective at higher temperaturesAdditional Program Buttons Shorter washing cycle for slightly dirty washingWater Protection Aqua Control What does Update mean?Consumption Values Filling Quantity Water EnergyPrepare washing cycle Before the First WashSort washing and prepare Washing Types and Care Codes Water softener How much washing detergent and care agent?Water hardness details Brief Instructions Run a Washing CycleAfter the Washing Program Ends Setting the Washing Program TablesChanging the spin speed Changing the spin speed/Selecting the rinse hold functionSelecting the rinse hold function Delay Timer Set the Delay Timer/Soaking DurationSoaking Duration For the maximum filling quantities, see the Program tables Opening and Closing the Filling DoorAdd the washing Close the filling door securelyCompartment for pre-wash agent/soaking agent If using liquid detergent / tabletsAdd Washing Detergent/Care Agent Or for water softenerIs pressed Start the Washing ProgramIf the time preselection is set Program sequence display Completion of the Washing ProgramMulti-display Select the Additional Program Changing a Washing ProgramChanging or aborting a program Change the Spin SpeedIf the power supply is interrupted Washing Cycle Ended/Remove WashingWashing Care Codes TemperatureProgram Tables Type of Washing MaxSeparate Spin Separate Conditioning/Starching/ImpregnatingSeparate Rinse Type of WashingCleaning and Care Detergent DrawerWashing Drum Main doorProblem Possible Cause Remedy Remedying FaultsWhat to do if Water tap is closed Open the water tap No water runs Tighten the intake hose Head 1m from units floor If at the end of the last rinse foam is still visible If the washing results are not satisfactoryIf there are still grey spots on the washing If there are white remnants on the washingCarrying out emergency drainage Drain pump When the water is completely drainedBefore cleaning the drain pump Ing pumped out, e.g. if the pump is blockedAdditional Rinse RINSE+ No additional rinse is set when the unit is deliveredCancel Additional Rinse To rinse with more waterSetting the child safety feature Child Safety FeatureCancelling the child safety Feature Installation and connection instructions Installation Safety PrecautionsTransporting the appliance Installation of the applianceWhen transporting the unit with a sack trolley Remove transport packagingAre supplied with it Cover the hole with the cap CInstallation on a concrete base Prepare the installation placeInstallation on vibrating floors Compensate for floor unevenness Water connection Electrical connectionPermissible water pressure Water inflow Water drain-off inside a siphon Water drainDelivery heads over 1m Water drain-off inside a basinDimensions in mm Technical dataDimensions = 0.1 1.0 MpaWeitere Kundendienststellen im Ausland Further after-sales service agencies overseasAutres agences étrangères assurant le service après-vente Otros puntos de Postventa en el extranjeroBulgaria Kuwait/Arabian Gulf Australia Korea South NamibiaCroatia New Zealand Cyprus Lebanon OmanThailand Slovakia Rep South Africa Israel Malaysia Saudi ArabiaJapan Singapore Slovenia HungaryPage Index Service When do you incur costs even during the warranty period?AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG
Related manuals
Manual 56 pages 44.61 Kb