Operating Instructions
What to do if ...
Remedying Faults
In the event of a fault, try to solve the problem yourself with the aid of the information provided here. If you call Customer Service to deal with one of the faults listed here or to remedy an operating fault, the customer service technician's visit will not be free of charge, even dur- ing the warranty period.
• If the fault code E10, E20 or E40 is shown in
the multidisplay, you may be able to remedy the fault yourself (see Faults Table below).
When you have remedied the fault, press the START/PAUSE button.
•With all other displayed faults (E plus number or letter): switch appli-
ance off and on again. Reset the wash programme and press the START/PAUSE button.
If the fault code is displayed again, please contact the Customer Service department quoting the fault code.
Problem | Possible Cause | Remedy | |
| The mains plug is not | Plug in the mains plug. | |
| plugged in. | ||
|
| ||
| The fuse of the building's | Replace the fuse. | |
| wiring is not in order. | ||
The washing machine |
| ||
The filling door is not cor- | Close the filling door; the | ||
does not work. | |||
| rectly closed. | lock must engage audibly. | |
| The button START/PAUSE | Press the button START/ | |
| was not pressed for long | PAUSE until the program be- | |
| enough. | gins. | |
The filling door cannot | The child safety feature is | Cancel the child safety fea- | |
ture (see section “Child | |||
be closed. | set. | ||
Safety Feature"). | |||
|
| ||
|
|
| |
Fault code E40 ap- | The filling door is not | Close the filling door cor- | |
pears. The indicator | |||
correctly closed. | rectly. Restart the program. | ||
MAIN WASH flashes. | |||
|
| ||
|
|
|
32