AEG 72640 Opening and closing the filling door, Add the washing, Close the filling door securely

Page 21

Operating Instructions

Opening and closing the filling door

0 Open: Pull on the handle of the filling door.

0Close: Press the filling door firmly closed.

The displays K (DOOR) and O/s (START/PAUSE) show when the unit is switched on whether the filling door can be opened.

 

Display K (DOOR)

Display O/s (START/PAUSE)

Door opening possible?

 

lights up green

flashes red

Yes

 

lights up green

lights up red

yes, after the O/s (START/

 

PAUSE) key is pressed

 

 

 

 

is off

flashes red

No1)

 

or lights up red

 

 

 

 

 

 

 

1) Filling door is locked because of a high water level or high temperature

3

If

 

 

 

– the display K (DOOR) flashes red,

 

then the error code E40 flashes in the multi display,

and the display l(MAIN WASH) flashes,

an attempt was made to start a washing program without the filling door being correctly closed. In this case, press the filling door firmly closed and start the washing program again.

Add the washing

3

For the maximum filling quantities, see the "Program tables".

 

See "Sort and prepare washing" for information on correctly preparing

the washing.

01. Sort and prepare the washing according to type.

2.Open the filling door: Pull on the handle of the filling door.

3. Fill with washing.

Important! When closing the door, make sure no items of washing get stuck! This could damage textiles and the unit.

4. Close the filling door securely.

21

Image 21
Contents ÖKO-LAVAMAT 72640 update Dear Customer Tips on using the appliancePlease read this user information carefully Pass it on to any future owners of the unitContents Installation and connection instructions Warranty conditions / Customer service centres Safety Before Using for the First TimeCorrect Use General Safety Safety of Children and Infirm PersonsEnvironmental tips DisposalDisposing of the Packaging Material Disposing of your old applianceUnit description Front viewDrawer for detergent and care agent Control panel Program selectorCOTTONS/LINEN Main washing cycle for delicates at 30 C or 40 C Woollens / P Hand WashIs rinsed in, spin PRE Wash Additional program buttonsSoaking StainWhat does Update mean? Consumption valuesFilling Quantity Water Energy Before the first wash Prepare washing cycleSort washing and prepare Washing Types and Care Symbols How much detergent and care agent? Detergents and care agents Which detergent and care agent?Water softener Water hardness detailsRun a washing cycle Brief instructionsAfter the washing program ends Tables Setting the Washing ProgramChanging the spin speed/Selecting the rinse hold function Changing the spin speedSelecting the rinse hold function Soaking duration Set the delay timer / soaking duration Delay timerAdd the washing Opening and closing the filling doorFor the maximum filling quantities, see the Program tables Close the filling door securelyAdd detergent/care agent If using liquid detergent / tabsCompartment for pre-wash/soaking detergent Or for water softenerCompletion of the Washing Program Start the washing programIf the time preselection is set Program sequence displayChanging or aborting the program Change programSelect the additional program Change the Spin SpeedWashing cycle is finished/Remove the washing Washing Program tablesHand Wash SWOOLLENS RCOLD to WoollensSeparate rinse Separate conditioning/starching/impregnationSeparate spin Type of washing Max. Filling quantity Program selectorDetergent Drawer Cleaning and CareMain door Washing DrumRemedying faults Problem Possible Cause RemedyWhat to do if Intake hose blocked Iron Drainage hose bent Remove the bend If there are still grey spots on the washing If the washing results are not satisfactoryIf at the end of the last rinse foam is still visible If there are white remnants on the washingCarrying out emergency drainage Before cleaning the drain pump When the water is completely drainedDrain pump Ing pumped out, e.g. if the pump is blockedCancel additional rinse No additional rinse is set when the unit is deliveredAdditional Rinse +ÁRINSE+ To rinse with more waterCancelling the child safety feature Child Safety FeatureCan be started On the inside of the filling doorInstallation Safety Precautions Installation and connection instructionsTransporting the appliance Installation of the applianceRemove transport packaging Under unitsCover the hole with the cap C Are supplied with itPrepare the installation place Installation on a concrete baseInstallation on vibrating floors Pensated for by adjusting the adjustable feet Compensate for floor unevennessDed foot as far as it will go Electrical connection Water connectionPermissible water pressure Water inflow Delivery heads over 1m Water drainWater drain-off inside a siphon Water drain-off inside a basinDimensions Technical dataDimensions in mm = 0.1 1.0 MpaAutres agences étrangères assurant le service après-vente Further after-sales service agencies overseasWeitere Kundendienststellen im Ausland Otros puntos de Postventa en el extranjeroCroatia New Zealand Australia Korea South NamibiaBulgaria Kuwait/Arabian Gulf Cyprus Lebanon OmanJapan Singapore Slovenia Israel Malaysia Saudi ArabiaThailand Slovakia Rep South Africa HungaryWarranty conditions / Customer service centres Page Index When do you incur costs even during the warranty period? ServiceAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG
Related manuals
Manual 48 pages 2.13 Kb