AEG 72640 If the washing results are not satisfactory, If there are white remnants on the washing

Page 35

 

 

 

Operating Instructions

 

 

 

 

 

Problem

Possible Cause

Remedy

 

 

The rinsing water is

The cause is probably a de-

No negative effect on the

 

 

tergent with a high silicate

rinsing result, use liquid de-

 

 

murky.

 

 

content.

tergent if necessary.

 

 

 

 

 

The corresponding dis-

 

 

 

 

play does not light up

The selected additional pro-

 

 

 

when one of the addi-

gram cannot be combined

Make another selection.

 

 

tional program but-

with the set program.

 

 

 

tons is pressed.

 

 

 

 

 

 

 

 

If the washing results are not satisfactory

If the washing has turned grey and if limescale is deposited in the drum, then

Too little detergent was used.

The wrong detergent was used.

Special soiling was not pre-treated.

Program or temperature not set correctly.

If multi-component detergents are used, the individual components were not used in the correct ratio.

If there are still grey spots on the washing,

Washing soiled with ointments, grease or oils was washed with too little detergent.

Too lower temperature was used for washing.

A frequent cause is that softener - particularly that in concentrated form - has reached the washing. Wash out such spots quickly and use the softener concerned carefully.

If at the end of the last rinse foam is still visible

Modern detergents can also cause foam in the last rinse. However, the washing is still sufficiently rinsed.

If there are white remnants on the washing

These are insoluble components of modern detergents. They are not the result of an insufficient rinsing effect.

Shake or brush out the washing. In future, perhaps you should turn the washing inside out before washing it. Examine your choice of de- tergent and if necessary use liquid detergent.

35

Image 35
Contents ÖKO-LAVAMAT 72640 update Pass it on to any future owners of the unit Tips on using the applianceDear Customer Please read this user information carefullyContents Installation and connection instructions Warranty conditions / Customer service centres Correct Use SafetyBefore Using for the First Time General Safety Safety of Children and Infirm PersonsDisposing of your old appliance DisposalEnvironmental tips Disposing of the Packaging MaterialDrawer for detergent and care agent Unit descriptionFront view COTTONS/LINEN Control panelProgram selector Is rinsed in, spin Main washing cycle for delicates at 30 C or 40 CWoollens / P Hand Wash Stain Additional program buttonsPRE Wash SoakingFilling Quantity Water Energy What does Update mean?Consumption values Sort washing and prepare Before the first washPrepare washing cycle Washing Types and Care Symbols Water hardness details Detergents and care agents Which detergent and care agent?How much detergent and care agent? Water softenerAfter the washing program ends Run a washing cycleBrief instructions Tables Setting the Washing ProgramSelecting the rinse hold function Changing the spin speed/Selecting the rinse hold functionChanging the spin speed Soaking duration Set the delay timer / soaking duration Delay timerClose the filling door securely Opening and closing the filling doorAdd the washing For the maximum filling quantities, see the Program tablesOr for water softener If using liquid detergent / tabsAdd detergent/care agent Compartment for pre-wash/soaking detergentProgram sequence display Start the washing programCompletion of the Washing Program If the time preselection is setChange the Spin Speed Change programChanging or aborting the program Select the additional programWashing cycle is finished/Remove the washing Washing Program tablesHand Wash SWOOLLENS RCOLD to WoollensType of washing Max. Filling quantity Program selector Separate conditioning/starching/impregnationSeparate rinse Separate spinDetergent Drawer Cleaning and CareMain door Washing DrumWhat to do if Remedying faultsProblem Possible Cause Remedy Intake hose blocked Iron Drainage hose bent Remove the bend If there are white remnants on the washing If the washing results are not satisfactoryIf there are still grey spots on the washing If at the end of the last rinse foam is still visibleCarrying out emergency drainage Ing pumped out, e.g. if the pump is blocked When the water is completely drainedBefore cleaning the drain pump Drain pumpTo rinse with more water No additional rinse is set when the unit is deliveredCancel additional rinse Additional Rinse +ÁRINSE+On the inside of the filling door Child Safety FeatureCancelling the child safety feature Can be startedInstallation Safety Precautions Installation and connection instructionsUnder units Installation of the applianceTransporting the appliance Remove transport packagingCover the hole with the cap C Are supplied with itInstallation on vibrating floors Prepare the installation placeInstallation on a concrete base Ded foot as far as it will go Pensated for by adjusting the adjustable feetCompensate for floor unevenness Permissible water pressure Electrical connectionWater connection Water inflow Water drain-off inside a basin Water drainDelivery heads over 1m Water drain-off inside a siphon= 0.1 1.0 Mpa Technical dataDimensions Dimensions in mmOtros puntos de Postventa en el extranjero Further after-sales service agencies overseasAutres agences étrangères assurant le service après-vente Weitere Kundendienststellen im AuslandCyprus Lebanon Oman Australia Korea South NamibiaCroatia New Zealand Bulgaria Kuwait/Arabian GulfHungary Israel Malaysia Saudi ArabiaJapan Singapore Slovenia Thailand Slovakia Rep South AfricaWarranty conditions / Customer service centres Page Index When do you incur costs even during the warranty period? ServiceAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG
Related manuals
Manual 48 pages 2.13 Kb