AEG 60810 Cleaning and maintenance, Cleaning procedure, Detergent dispenser drawer, Washing drum

Page 18

Cleaning and maintenance

Important! Do not use furniture care products or aggressive cleaners to clean the appliance.

Wipe control panel and body with a damp cloth.

Cleaning procedure

If you plan to wash mainly at low temperature, you should run a hot programme from time to time. This will reduce any deposits and clean the appliance from the inside.

Detergent dispenser drawer

The detergent dispenser drawer should be cleaned regularly.

1.Remove the detergent dispenser drawer by pulling it firmly.

2. Remove the conditioner insert from the middle compartment.

3. Clean all parts with water.

4. Put the conditioner insert in as far as it will go, so that it is firmly in place.

5.Clean all parts of the washing ma- chine, especially the nozzles in the

top of the washing-in chamber, with a brush.

6. Insert the detergent dispenser draw- er in the guide rails and push it in.

Washing drum

Rust deposits in the drum may occur due to rusting foreign bodies in the washing or tap water containing iron.

Important! Do not clean the drum with acidic descaling agents, scour- ing agents containing chlorine or iron or steel wool.

1.Remove any rust deposits on the drum with a cleaning agent for stain- less steel.

2.Run a washing cycle without any washing to clean off any cleaning

agent residues. Programme: (COTTONS/LINEN) 60, press the button (QUICK WASH), add approx. 1/4 measuring cup of washing powder.

18

Image 18
Contents Lavamat Following symbols are used in the text Dear customerContents Installation and connection instructions Child safety SafetyPrior to using for the first time Follow the Instructions for installation and connectionGeneral safety This could constitute a fire hazard through overheatingDescription of the appliance Control panelProgramme overview Drain SpinApplication/features Preparing washing Before the first washPreparing and sorting washing Sorting washingRunning a washing cycle Opening the door/Loading the washingAdding detergent/additives Switching on the appliance/selecting a programme Washing powder/tablets for the main washIf you use liquid detergents Changing the spin speed/Selecting rinse hold Selecting the programme optionsSetting the delay timer Starting a programmeInterrupting a programme Programme progressInterrupting a programme/Adding washing Adding washingEnd of the wash cycle/Removing the washing If Rinse Hold has been selectedChild safety device Releasing the child safety deviceDetergent dispenser drawer Cleaning and maintenanceCleaning procedure Washing drumWhat to do if Door and rubber collarRemedying small malfunctions Let hose fitting is blocked Conditioner insert There are grey stains on the washing If the wash results are not satisfactoryWashing is grey and scale is being deposited in the drum After the last rinse foam can still be seenWhen the water has all drained away Carrying out an emergency drainDrain pump Disposal Packaging materialOld appliance Technical data Consumption valuesInstallation and connection instructions Safety information for the installationTransporting the appliance Installing the applianceWhen moving using a sack trolley Removing the transit packagingSeal hole using sealing cap C Where to install If the appliance is to stand on a plinthMaking the appliance level Connecting to the water supplyElectrical connection Permitted water pressureWater inflow Water drainage Pumping heights over 1 mDraining water into a wash basin/bath Weitere Kundendienststellen im Ausland Further after-sales service agencies overseasAutres agences étrangères assurant le service après-vente Otros puntos de Postventa en el extranjeroAustralia Korea South Namibia Japan Singapore Slovenia Page Page Service AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG