AEG 60810 Installing the appliance, Transporting the appliance, Removing the transit packaging

Page 28

Installing the appliance

Transporting the appliance

1 Warning! The washing machine is very heavy. Risk of injury. Be careful when lifting.

Do not lay the appliance on its front nor on its right side (as seen from the front). Electrical components may get wet.

Never transport the appliance without its transit packaging. Only re- move the transit packaging when the appliance is in its place of in- stallation. Transporting the appliance without its transit packaging can lead to damage to the appliance.

Never lift the appliance by the door when it is open nor by the plinth.

When moving using a sack trolley:

Only use the sack trolley on the side of the appliance.

Removing the transit packaging

Important! Before using the appli- ance for the first time, all parts of the transit packaging must be re- moved! Keep the transit packaging in a safe place, in case it is needed at a later date when the appliance is to be moved (e.g. moving house).

1. At the back of the appliance, open both hose clips and remove both hoses and mains cable.

2.Remove both hose clips from the ap-

pliance by jerking them hard.

28

Image 28
Contents Lavamat Following symbols are used in the text Dear customerContents Installation and connection instructions Safety Prior to using for the first timeChild safety Follow the Instructions for installation and connectionGeneral safety This could constitute a fire hazard through overheatingDescription of the appliance Control panelProgramme overview Drain SpinApplication/features Before the first wash Preparing and sorting washingPreparing washing Sorting washingOpening the door/Loading the washing Running a washing cycleAdding detergent/additives Washing powder/tablets for the main wash Switching on the appliance/selecting a programmeIf you use liquid detergents Changing the spin speed/Selecting rinse hold Selecting the programme optionsSetting the delay timer Starting a programmeProgramme progress Interrupting a programme/Adding washingInterrupting a programme Adding washingEnd of the wash cycle/Removing the washing If Rinse Hold has been selectedChild safety device Releasing the child safety deviceCleaning and maintenance Cleaning procedureDetergent dispenser drawer Washing drumDoor and rubber collar What to do ifRemedying small malfunctions Let hose fitting is blocked Conditioner insert If the wash results are not satisfactory Washing is grey and scale is being deposited in the drumThere are grey stains on the washing After the last rinse foam can still be seenWhen the water has all drained away Carrying out an emergency drainDrain pump Packaging material Disposal Old appliance Technical data Consumption valuesInstallation and connection instructions Safety information for the installationInstalling the appliance When moving using a sack trolleyTransporting the appliance Removing the transit packagingSeal hole using sealing cap C Where to install If the appliance is to stand on a plinthConnecting to the water supply Electrical connectionMaking the appliance level Permitted water pressureWater inflow Pumping heights over 1 m Water drainageDraining water into a wash basin/bath Further after-sales service agencies overseas Autres agences étrangères assurant le service après-venteWeitere Kundendienststellen im Ausland Otros puntos de Postventa en el extranjeroAustralia Korea South Namibia Japan Singapore Slovenia Page Page Service AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG