AEG 60810 manual If the wash results are not satisfactory, There are grey stains on the washing

Page 22

If the wash results are not satisfactory

Washing is grey and scale is being deposited in the drum

Too little detergent is being used.

The right detergent was not used.

Special soiling was not pre-treated.

Programme or temperature was not correctly set.

There are grey stains on the washing.

Washing soiled with ointment, grease or oil was washed with too lit- tle detergent.

It was washed at too low a temperature.

A common cause is that fabric conditioner – especially a concentrate

– has got onto the washing. Such stains should be washed out as quickly as possible and make sure that you are careful when using fabric conditioner.

After the last rinse foam can still be seen.

Modern detergents may create foam even in the last rinse cycle. The washing is however sufficiently rinsed.

There are white residues on the washing.

This is due to the insoluble ingredients in modern detergents. They are not caused by insufficient rinsing.

Shake or brush the washing. If possible turn the washing inside out before washing. Check your choice of detergent. Especially with dark colours it is advisable to use liquid detergents.

22

Image 22
Contents Lavamat Following symbols are used in the text Dear customerContents Installation and connection instructions Child safety SafetyPrior to using for the first time Follow the Instructions for installation and connectionGeneral safety This could constitute a fire hazard through overheatingDescription of the appliance Control panelProgramme overview Drain SpinApplication/features Preparing washing Before the first washPreparing and sorting washing Sorting washingOpening the door/Loading the washing Running a washing cycleAdding detergent/additives Washing powder/tablets for the main wash Switching on the appliance/selecting a programmeIf you use liquid detergents Changing the spin speed/Selecting rinse hold Selecting the programme optionsSetting the delay timer Starting a programmeInterrupting a programme Programme progressInterrupting a programme/Adding washing Adding washingEnd of the wash cycle/Removing the washing If Rinse Hold has been selectedChild safety device Releasing the child safety deviceDetergent dispenser drawer Cleaning and maintenanceCleaning procedure Washing drumDoor and rubber collar What to do ifRemedying small malfunctions Let hose fitting is blocked Conditioner insert There are grey stains on the washing If the wash results are not satisfactoryWashing is grey and scale is being deposited in the drum After the last rinse foam can still be seenWhen the water has all drained away Carrying out an emergency drainDrain pump Packaging material DisposalOld appliance Technical data Consumption valuesInstallation and connection instructions Safety information for the installationTransporting the appliance Installing the applianceWhen moving using a sack trolley Removing the transit packagingSeal hole using sealing cap C Where to install If the appliance is to stand on a plinthMaking the appliance level Connecting to the water supplyElectrical connection Permitted water pressureWater inflow Pumping heights over 1 m Water drainageDraining water into a wash basin/bath Weitere Kundendienststellen im Ausland Further after-sales service agencies overseasAutres agences étrangères assurant le service après-vente Otros puntos de Postventa en el extranjeroAustralia Korea South Namibia Japan Singapore Slovenia Page Page Service AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG