AEG 60810 manual General safety, This could constitute a fire hazard through overheating

Page 6

General safety

•Repairs to the washing machine must only be carried out by qualified service engineers.

•Never use the washing machine if the mains cable is damaged; or if the control panel, work top or plinth area is damaged such that the inside of the appliance is freely accessible.

•Switch off the washing machine before cleaning, maintenance and servicing. In addition, pull the mains plug out of the socket or – in the case of a permanent connection – switch off the cut-out in the fuse box or remove the screw fuse completely.

•If operation is stopped, disconnect the appliance from the mains sup- ply and shut off the water tap.

•Never unplug the appliance by pulling on the cable. Always pull the plug.

•Multi-way plugs, connectors and extension cables must not be used.

This could constitute a fire hazard through overheating.

•Never wash the washing machine down with a water jet. Danger of electric shock!

•In washing programmes with high temperatures the glass in the door gets hot. Do not touch it.

•Before emergency emptying of the appliance, before cleaning the drain pump or opening the door in an emergency, let the water cool down.

•Small animals can nibble at the cables and water hoses. Danger of electric shock and danger of water damage! Keep small animals away from the washing machine.

6

Image 6

Contents Lavamat Following symbols are used in the text Dear customerContents Installation and connection instructions Child safety SafetyPrior to using for the first time Follow the Instructions for installation and connectionGeneral safety This could constitute a fire hazard through overheatingDescription of the appliance Control panelProgramme overview Drain SpinApplication/features Preparing washing Before the first washPreparing and sorting washing Sorting washingRunning a washing cycle Opening the door/Loading the washingAdding detergent/additives Switching on the appliance/selecting a programme Washing powder/tablets for the main washIf you use liquid detergents Changing the spin speed/Selecting rinse hold Selecting the programme optionsSetting the delay timer Starting a programmeInterrupting a programme Programme progressInterrupting a programme/Adding washing Adding washingEnd of the wash cycle/Removing the washing If Rinse Hold has been selectedChild safety device Releasing the child safety deviceDetergent dispenser drawer Cleaning and maintenanceCleaning procedure Washing drumWhat to do if Door and rubber collarRemedying small malfunctions Let hose fitting is blocked Conditioner insert There are grey stains on the washing If the wash results are not satisfactoryWashing is grey and scale is being deposited in the drum After the last rinse foam can still be seenWhen the water has all drained away Carrying out an emergency drainDrain pump Disposal Packaging materialOld appliance Technical data Consumption valuesInstallation and connection instructions Safety information for the installationTransporting the appliance Installing the applianceWhen moving using a sack trolley Removing the transit packagingSeal hole using sealing cap C Where to install If the appliance is to stand on a plinthMaking the appliance level Connecting to the water supplyElectrical connection Permitted water pressureWater inflow Water drainage Pumping heights over 1 mDraining water into a wash basin/bath Weitere Kundendienststellen im Ausland Further after-sales service agencies overseasAutres agences étrangères assurant le service après-vente Otros puntos de Postventa en el extranjeroAustralia Korea South Namibia Japan Singapore Slovenia Page Page Service AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG