Door and rubber collar
Regularly check whether deposits or foreign bodies are present in the folds of the rubber collar or on the inside of the glass door.
Clean the glass in the door and the rubber collar regularly.
What to do if...
Remedying small malfunctions
If during use of the appliance one of the following error codes is shown in the
–E10 (Problems with water inflow),
–E20 (Problems with water outflow),
–E40 (door open),
please have a look at the following table.
When the fault is remedied, press the button (START/PAUSE). In the event of other errors (E and a number or letter): Switch the ap- pliance off and then on again.
button (START/PAUSE).
If the error appears again, please contact the Customer Care Depart- ment, stating the error code.
Problem |
| Possible cause |
| Remedy | |
| Mains plug not plugged in | Connect the plug to a mains | |||
| or fuse not working. | socket. Check fuse. | |||
Washing machine is not | Door not closed properly. | Close door - there should be | |||
an audible click. | |||||
working. |
|
| |||
|
|
|
| ||
| The | button (START/ | Press the | button | |
| PAUSE) button was not | ||||
| (START/PAUSE). | ||||
| pressed for long enough. | ||||
|
|
| |||
The door cannot be | Child safety device engaged. | Release the child safety de- | |||
closed. | vice. |
| |||
When a button is | The selected function can- | Select another function. | |||
pressed, Err appears in | not be combined with the | ||||
the | programme set. |
|
| ||
E40 appears. |
|
|
|
| |
indicator (END) | The door is not closed prop- | Close the door properly. Re- | |||
flashes 4x, at the same | |||||
erly. |
| start the programme. | |||
time an acoustic signal |
| ||||
|
|
|
| ||
sounds 4x. |
|
|
|
| |
|
|
|
|
|
19