AEG 62840 user manual Select the START/PAUSE Button, Select the Delay Start Button

Page 16

16Use

displayed for about 2 seconds and the yellow pilot light of button 8 light starts blinking.

Alarm codes

In the event of operating problems, some alarm codes can be displayed, for example E20 (see paragraph «Something not working»).

End of programme

When the programme has finished a blinking zero is displayed, the DOOR and WASHING pilot lights and the pilot light of button 8 go out and the door can be opened.

Select the START/PAUSE (Button 8)

To start the selected programme, press the button 8, the corresponding red pilot light stops blinking.

The WASHING pilot light is on to indicate that the appliance starts operating.

The DOOR pilot light is on to indicate the door is locked.

To interrupt a programme which is running, depress the button 8: the corresponding red pilot light starts to flash.

To restart the programme from the point at which it was interrupted, press the button 8 again.

If you have chosen a delayed start, the machine will begin the countdown.

If an incorrect option is selected, the integrated yellow pilot light of the button 8 blinks for 3 times the message Err is displayed for about 2 seconds.

Select the DELAY START (Button 9)

Before you start the programme, if you wish to delay the start, press the button 9 repeatedly, to select the desired delay.

The selected delay time value (up to 20 hours) will appear on the display for about 3 seconds, then the duration of the programme will appear again.

You must select this option after you have set the programme and before you press the button 8.

The wash programme can be delayed from 30 min - 60 min - 90 min, 2 hours and then by 1 hour up to a maximum of 20 hours by means of this button.

Image 16
Contents Lavamat Dear Customer Contents International wash code symbols Care and cleaning 29-33 Enviroment concerns Prior to using for the first time Safety informationGeneral safety Installation UseChild Safety Product description Detergent dispenser drawerControl panel 4 5 6 7 8 9Acoustic signals Child safety lockFirst Use PersonalizationLoad the laundry Daily UseMeasure out the detergent and the fabric softener Position = Cold wash Easy-Cares = Synthetics To empty the water outProgramme option button Select the Prewash option ButtonSelect the Stain option Button Select the Sensitive option ButtonSelect the Time option Button Display PositionSelect the Delay Start Button Select the START/PAUSE ButtonProgramme progress display Position Select an additional rinse Extra rinseCancelling a programme Altering an option or a running programmeInterrupting a programme Opening the door after the programme has startedAt the end of the programme Temperature Washing programmesSpin Programme information Easy Iron Plus Wool Plus Handwash Rinses Drain Spin RefreshTemperatures Preparing the wash cycleSorting out the laundry Before loading the laundryLaundry weights Maximum loadsRemoving stains Detergents and additives Quantity of detergent to be usedDegrees of water hardness International wash code symbols Energetic wash Delicate washCare and cleaning Door seal Washing drumDrain pump Care and cleaning Water inlet filter Emergency emptying outFrost precautions Possible cause/Solution Something not workingSomething not working Cause possible/Solution Mod Techinical Data Door includedConsumption value ForInstallation UnpackingDoor seal Fill the smaller upper hole and the two large onesPositioning and levelling Water inletWater drainage Water-stop deviceInto a drainage standpipe Onto a sink outlet spigot Interest of the environment Electrical connectionInstallation Enviroment concerns Packaging materialsOld machine Ecological hintsStandard guarantee conditions 0870 5 929Customer Care European Guarantee Customer service centres 132 969 060-00-302007 Subject to change without notice