AEG 62840 user manual Removing stains

Page 25

Preparing the wash cycle 25

Removing stains

Stubborn stains may not be removed by just water and detergent. It is therefore advisable to treat them prior to washing.

Blood: treat fresh stains with cold water. For dried stains, soak overnight in water with a special detergent then rub in the soap and water.

Oil based paint: moisten with benzine stain remover, lay the garment on a soft cloth and dab the stain; treat several times.

Dried grease stains: moisten with turpentine, lay the garment on a soft surface and dab the stain with the fingertips and a cotton cloth.

Rust: oxalic acid dissolved in hot water or a rust removing product used cold. Be careful with rust stains which are not recent since the cellulose structure will already have been damaged and the fabric tends to hole.

Mould stains: treat with bleach, rinse well (whites and fast coloureds only).

Grass: soap lightly and treat with bleach (whites and fast coloureds only).

Ball point pen and glue: moisten with acetone (*), lay the garment on a soft cloth and dab the stain.

Lipstick: moisten with acetone as above, then treat stains with methylated spirits. Treat any residual marks with bleach.

Red wine: soak in water and detergent, rinse and treat with acetic or citric acid, then rinse. Treat any residual marks with bleach.

Ink: depending on the type of ink, moisten the fabric first with acetone (*), then with acetic acid; treat any residual marks on white fabrics with bleach and then rinse thoroughly.

Tar stains: first treat with stain remover, methylated spirits or benzine, then rub with detergent paste.

(*) do not use acetone on artificial silk.

Image 25
Contents Lavamat Dear Customer Contents International wash code symbols Care and cleaning 29-33 Enviroment concerns Prior to using for the first time Safety informationGeneral safety Use InstallationChild Safety Detergent dispenser drawer Product description4 5 6 7 8 9 Control panelChild safety lock Acoustic signalsFirst Use PersonalizationLoad the laundry Daily UseMeasure out the detergent and the fabric softener To empty the water out Position = Cold wash Easy-Cares = SyntheticsSelect the Prewash option Button Programme option buttonSelect the Stain option Button Select the Sensitive option ButtonDisplay Position Select the Time option ButtonSelect the START/PAUSE Button Select the Delay Start ButtonSelect an additional rinse Extra rinse Programme progress display PositionAltering an option or a running programme Cancelling a programmeInterrupting a programme Opening the door after the programme has startedAt the end of the programme Washing programmes TemperatureSpin Easy Iron Plus Wool Plus Handwash Rinses Drain Spin Refresh Programme informationPreparing the wash cycle TemperaturesSorting out the laundry Before loading the laundryMaximum loads Laundry weightsRemoving stains Quantity of detergent to be used Detergents and additivesDegrees of water hardness Energetic wash Delicate wash International wash code symbolsCare and cleaning Door seal Washing drumDrain pump Care and cleaning Emergency emptying out Water inlet filterFrost precautions Something not working Possible cause/SolutionSomething not working Cause possible/Solution Mod Door included Techinical DataFor Consumption valueUnpacking InstallationFill the smaller upper hole and the two large ones Door sealWater inlet Positioning and levellingWater drainage Water-stop deviceInto a drainage standpipe Onto a sink outlet spigot Electrical connection Interest of the environmentInstallation Packaging materials Enviroment concernsOld machine Ecological hints0870 5 929 Standard guarantee conditionsCustomer Care European Guarantee Customer service centres 132 969 060-00-302007 Subject to change without notice