AEG 62840 user manual Door seal, Fill the smaller upper hole and the two large ones

Page 41

		Installation	41
4. Unscrew and remove the two large rear bolts B
and the six smaller bolts C.
			C
	C	D	B
HEC0003	C	B
5. Remove the bracket D and tighten up the six
smaller bolts C. Slide out the relevant plastic
spacer E.		E
			C
HEC0023 C
6. Open the porthole, take out the inlet hose from the
drum and remove the polystyrene block fitted on the
door seal.
	HEC0010

7.Fill the smaller upper hole and the two large ones

with the corresponding plastic plug caps supplied in the bag containing the instruction booklet.

8.Connect the water inlet hose as described under the

paragraph «Water inlet».

All the different plug caps are supplied with the appliance in the plastic bag containing the instruction booklet.

HEC0005

Image 41

Contents Lavamat Dear Customer Contents International wash code symbols Care and cleaning 29-33 Enviroment concerns General safety Safety informationPrior to using for the first time Use InstallationChild Safety Detergent dispenser drawer Product description4 5 6 7 8 9 Control panelChild safety lock Acoustic signalsFirst Use PersonalizationMeasure out the detergent and the fabric softener Daily UseLoad the laundry To empty the water out Position = Cold wash Easy-Cares = SyntheticsSelect the Prewash option Button Programme option buttonSelect the Stain option Button Select the Sensitive option ButtonDisplay Position Select the Time option ButtonSelect the START/PAUSE Button Select the Delay Start ButtonSelect an additional rinse Extra rinse Programme progress display PositionAltering an option or a running programme Cancelling a programmeInterrupting a programme Opening the door after the programme has startedAt the end of the programme Washing programmes TemperatureSpin Easy Iron Plus Wool Plus Handwash Rinses Drain Spin Refresh Programme informationPreparing the wash cycle TemperaturesSorting out the laundry Before loading the laundryMaximum loads Laundry weightsRemoving stains Quantity of detergent to be used Detergents and additivesDegrees of water hardness Energetic wash Delicate wash International wash code symbolsCare and cleaning Drain pump Washing drumDoor seal Care and cleaning Emergency emptying out Water inlet filterFrost precautions Something not working Possible cause/SolutionSomething not working Cause possible/Solution Mod Door included Techinical DataFor Consumption valueUnpacking InstallationFill the smaller upper hole and the two large ones Door sealWater inlet Positioning and levellingInto a drainage standpipe Water-stop deviceWater drainage Onto a sink outlet spigot Electrical connection Interest of the environmentInstallation Packaging materials Enviroment concernsOld machine Ecological hints0870 5 929 Standard guarantee conditionsCustomer Care European Guarantee Customer service centres 132 969 060-00-302007 Subject to change without notice