AEG 62840 user manual Positioning and levelling, Water inlet

Page 42

42Installation

Positioning and levelling

Install the machine on a flat hard floor.

Make sure that air circulation around the machine is not impeded by carpets, rugs etc.

Before placing it on small tiles, apply a rubber coating.

Never try to correct any unevenness in the floor by putting pieces of wood, cardboard or similar materials under the machine.

If it is impossible to avoid positioning the machine

next to a gas cooker or coal-burning stove, an HEC007S insulating panel covered with aluminium foil on the

side facing the cooker or stove, must be inserted between the two appliances.

The machine must not be installed in rooms where the temperature can drop below 0.

The water inlet hose and the drain hose must not be kinked.

Please ensure that when the appliance is installed, it is easily accessible for the engineer in the event of a breakdown.

Carefully level by screwing the adjustable feet in or out. Never place cardboard, wood or similar materials under the machine to compensate for any unevenness in the floor.

Water inlet

An inlet hose is supplied and can be found inside the machine drum.

Do not use the already employed hoses to connect to the water supply.

This appliance must be connected to a cold water supply.

1. Open the porthole and extract the inlet hose.

2.Connect the hose with the angled connection to the machine.

Do not place the inlet hose downwards. Angle the hose to the left or right depending on the position of your water tap.

HEC0006

Image 42

Contents Lavamat Dear Customer Contents International wash code symbols Care and cleaning 29-33 Enviroment concerns Safety information Prior to using for the first timeGeneral safety Installation UseChild Safety Product description Detergent dispenser drawerControl panel 4 5 6 7 8 9First Use Acoustic signalsChild safety lock PersonalizationDaily Use Load the laundryMeasure out the detergent and the fabric softener Position = Cold wash Easy-Cares = Synthetics To empty the water outSelect the Stain option Button Programme option buttonSelect the Prewash option Button Select the Sensitive option ButtonSelect the Time option Button Display PositionSelect the Delay Start Button Select the START/PAUSE ButtonProgramme progress display Position Select an additional rinse Extra rinseInterrupting a programme Cancelling a programmeAltering an option or a running programme Opening the door after the programme has startedAt the end of the programme Temperature Washing programmesSpin Programme information Easy Iron Plus Wool Plus Handwash Rinses Drain Spin RefreshSorting out the laundry TemperaturesPreparing the wash cycle Before loading the laundryLaundry weights Maximum loadsRemoving stains Detergents and additives Quantity of detergent to be usedDegrees of water hardness International wash code symbols Energetic wash Delicate washCare and cleaning Washing drum Door sealDrain pump Care and cleaning Water inlet filter Emergency emptying outFrost precautions Possible cause/Solution Something not workingSomething not working Cause possible/Solution Mod Techinical Data Door includedConsumption value ForInstallation UnpackingDoor seal Fill the smaller upper hole and the two large onesPositioning and levelling Water inletWater-stop device Water drainageInto a drainage standpipe Onto a sink outlet spigot Interest of the environment Electrical connectionInstallation Old machine Enviroment concernsPackaging materials Ecological hintsStandard guarantee conditions 0870 5 929Customer Care European Guarantee Customer service centres 132 969 060-00-302007 Subject to change without notice