AEG 62840 user manual Installation, Unpacking

Page 40

40Installation

Installation

Unpacking

All transit bolts and packing must be removed before using the appliance.

You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again.

1.After removing all the packaging, carefully lay machine on it’s back to remove the

polystyrene base from the bottom.

HEC0008

2.Remove the power supply cable and the draining hose

from the hose holders on the rear of the appliance.

HEC0001

3. With the provided spanner unscrew and remove the central rear bolt A.

A

HEC00022

Image 40

Contents Lavamat Dear Customer Contents International wash code symbols Care and cleaning 29-33 Enviroment concerns Prior to using for the first time Safety informationGeneral safety Installation UseChild Safety Product description Detergent dispenser drawerControl panel 4 5 6 7 8 9Acoustic signals Child safety lockFirst Use PersonalizationLoad the laundry Daily UseMeasure out the detergent and the fabric softener Position = Cold wash Easy-Cares = Synthetics To empty the water outProgramme option button Select the Prewash option ButtonSelect the Stain option Button Select the Sensitive option ButtonSelect the Time option Button Display PositionSelect the Delay Start Button Select the START/PAUSE ButtonProgramme progress display Position Select an additional rinse Extra rinseCancelling a programme Altering an option or a running programmeInterrupting a programme Opening the door after the programme has startedAt the end of the programme Temperature Washing programmesSpin Programme information Easy Iron Plus Wool Plus Handwash Rinses Drain Spin RefreshTemperatures Preparing the wash cycleSorting out the laundry Before loading the laundryLaundry weights Maximum loadsRemoving stains Detergents and additives Quantity of detergent to be usedDegrees of water hardness International wash code symbols Energetic wash Delicate washCare and cleaning Door seal Washing drumDrain pump Care and cleaning Water inlet filter Emergency emptying outFrost precautions Possible cause/Solution Something not workingSomething not working Cause possible/Solution Mod Techinical Data Door includedConsumption value ForInstallation UnpackingDoor seal Fill the smaller upper hole and the two large onesPositioning and levelling Water inletWater drainage Water-stop deviceInto a drainage standpipe Onto a sink outlet spigot Interest of the environment Electrical connectionInstallation Enviroment concerns Packaging materialsOld machine Ecological hintsStandard guarantee conditions 0870 5 929Customer Care European Guarantee Customer service centres 132 969 060-00-302007 Subject to change without notice