Avanti W711, W712PS Delay Start Preset Setting, Auto-Locking Lid, Child Safety Lock

Page 18

Close the lid, or the washing machine will buzz during wash and spin cycle.

In the event the clothing loaded becomes unbalanced, the safety switch will be triggered causing the washing machine to automatically refill with water to adjust the imbalance.

Note:

Clothes easily discolored should be washed separately so as to prevent inter-dyeing.

If you want to change a selected program, press the POWER button first to turn the unit off, then press the POWER button again to turn the unit back on, then press the Program button to select the new cycle before pushing START/PAUSE button.

When the Rinse and Spin functions are ON, do not use detergent.

If you want to drain the water during washing, press the POWER button first to turn the unit off, then press the POWER button again to turn the unit back on, then select the Rinse program. Press START/PAUSE button again to restart.

DELAY START (PRESET) SETTING

Select this option when you would like to load the washer but not run the wash cycle until a later time. Note:

As washing machines and other appliances are considered to present a potential child entrapment danger; you should never run a wash cycle when you are not present for either the entire or major portion of the cycle.

Press down the power button.

Load the washing machine and select the appropriate wash program.

Press DELAY button continuously to select the delay start time. (From 1 hour to 48 hours)

Close the lid completely.

Press START/PAUSE button to start the course.

AUTO-LOCKING LID

Your washing machine is equipped with a safety setting that will lock the lid to prevent the lid from being opened during operation.

For your protection the lid will be automatically locked once you press the START/PAUSE button to start a wash cycle.

At the end of the selected wash program the lid will automatically unlock and allow access to the clothes being washed.

If at any time you need to add or remove an article from the washer after the lid lock has been engaged, you must turn the unit off or press and hold the START/PAUSE button until the door lock is released, wait for the lock to disengage, add or remove the item and then start the wash program from the beginning.

CHILD SAFETY LOCK

If you have small children, it is recommended that you activate this setting every time you use the washing machine as children can be attracted to and enticed to play with the washing machine.

Select the desired washing program as described previously in this manual

Select the appropriate program and press START/PAUSE button to start the washing machine.

Press and hold both the FUNCTION and WATER LEVEL buttons until you heard a “BEEP” sound and “CL” is displayed on the electronic display.

The “CL” indicator and remaining wash time will display intermittently.

To de-activate the child lock function simply press and hold the FUNCTION and WATER LEVEL buttons again.

18

Image 18
Contents Manual DE Instrucciones Page Table of Contents Appliance Safety Your safety and the safety of others are very importantImportant Safeguides Help US Help YOU Read this guide carefullyParts & Features Important Safety Instructions Before Using Your Portable Washer Selecting a LocationInstalling the Noise Damper Plate Connecting the Water Supply HosesDisconnecting the Water Supply Hoses Sink Faucet ConnectionPositioning the Drain Hose  Electrical Connection  Extension Cord Surge Protector Control Panel Operating Your Portable Washer PreparationBefore Washing Before Washing Operating Instructions Manual Functions Selection Custom Washing CycleAutomatic Wash Programs Normal For normal laundry Approximately 42 Minute cycleDelay Start Preset Setting Child Safety LockAUTO-LOCKING LID Care and Maintenance Cleaning Your Portable WasherProblems with Your Portable WASHER? Avanti Products Customer ServicesYour Avanti Products Warranty ADVERTENCIA Page Removiendo EL Protector Panel DE Control Asegurese DE Colocar EL Anillo Instrucciones Para Operar LA Lavadora Encendido Power Modo DE Empleo PreparacionLimpiando EL Filtro DE Pelusas Mantenimiento DE InviernoPage Page Registration Information W711 VER3.0-10312011