Description of the appliance
•select the empty programme J to empty out the water without spin- ning.
Warning! The programme selector knob must be turned first to CAN- CEL (IPTAL) and then to programme J.
This option can also be selected for the wool programme: the last rinse water is emptied out but the machine does not spin.
If the water is not emptied out, the machine automatically empties itself after 18 hours.
J START/PAUSE button (START ARA VERME)
This button has three functions:
a)Start
After having selected the required wash programme, press this button to start the machine; the corresponding pilot light stops flashing.
b)Pause
To interrupt a programme which is running, press the START/PAUSE (START ARA VERME) button: the corresponding pilot light and the light of the programme phase which is running will start to flash.
To restart the programme from the point at which it was interrupted, press the START/PAUSE (START ARA VERME) button again.
c)Empty out water
At the end of a programme which ends with water in the drum (ANTI- CREASE option - SUDA BEKLETME), or after the soak programme F, press the START/PAUSE (START ARA VERME) button to empty out the water: after a soak programme, the machine will empty only; after ANTICREASE (SUDA BEKLETME) programmes, the machine will empty and spin.
K SPIN SPEED button (SIKMA)
Press this button to select the required spin speed, remembering that:
•for cottons (Programmes A) the maximum spin speed is 1250 rpm;
•for synthetics (Progr. B) and wool (Progr. D) the maximum spin speed is 900 rpm;
•for delicate fabrics (Progr. C) the maximum spin speed is 700 rpm.
56