AEG 135 EL manual Feet have not been

Page 33

Something not working?

Problem

 

Possible cause

 

Solution

 

 

 

 

 

The machine vibrates or is noisy

The door will not open

The transit bolts have

Check that the machine

not been removed.

has been unpacked as

 

described in the Installation

 

section.

The feet have not been

Carefully level the machine.

adjusted.

 

There is little laundry in

Correct operation of the

the drum.

machine is not affected.

The machine is in contact

Move the machine slightly

with the wall or furniture.

away from the wall or

 

furniture.

 

 

The programme is still

Wait until the end of the

running.

programme before opening

 

the door.

The door lock has not yet

Wait about 2 minutes for

released.

the door lock to release.

 

The door cannot be opened

 

until the pilot light located

 

next to the door handle

 

has gone out.

The water level is above the

Before opening the door,

bottom edge of the door.

the water must be emptied

 

out.

The machine is heating the

Wait until the end of the

water.

heating phase.

 

 

75

Image 33
Contents Lavamat 135 EL Dear customer Contents Page General notes Safety instructionsPositioning, connection, starting up Follow the instructions for positioning and connectionProper use Child safetyDiscarding Packaging materialsMachine Tips for environmental protection Main features of your washing machine Front view Description of the applianceMains on light Control panelON/OFF button Açma Kapama Buttons and corresponding functionsDelay Start button Geciktirme TU‚U DisplayDisplay shows the following information Prewash button ÖN Yikama Quick Wash button Kisa YikamaExtra Rinse button EK Durulama Anticrease button stop with water in drumSpin Speed button Sikma START/PAUSE button Start ARA VermeStart PauseCancelling a programme Programme phase indicatorSymbols on the programme selector Programme selectorOpening the door after the programme has started Before the first wash Detergent and additive dispenser drawerSorting out and preparing the laundry Preparing the wash cycleWhites Types of fabric and care labelsColoureds Coloureds 40Woollens and particularly delicate items Delicates 40Detergents and additives Switching the machine on How to washLoad the laundry Add detergent and additiveSelection of the spin speed Selection of the desired wash programmeSpin Speed Sikma button the corre Sponding light comes on Corresponding light comes onStarting the programme Selection of the Delay Start option Geciktirme TU‚UAt the end of the programme Programme chart Wash programmesWash Temp Fabrics Additional Max Consumption Special programmes TypeMax Consumption Laundry Periodical cleaning Bodywork Cleaning and maintenanceAfter each wash Detergent dispenser drawerWater inlet filter Drain filterEmergency emptying out Frost precautionsTroubleshooting Problem Possible cause SolutionSomething not working? Possible cause Solution ProblemFeet have not been Problem Possible cause Solution If grey stains remain on the laundry Unsatisfactory washing resultsFoam is still visible even after the last rinse White residue is left on the laundryThis appliance complies with the following EC directives Technical dataService Safety instructions Instructions for installation and electrical connectionRear view Dimensions of the applianceUnpacking InstallationPositioning LevellingBefore placing it on small tiles, apply a rubber coating Permanent connection Electrical connectionDirectly into a Not more than 90 cm EndWater inlet Water drainageEnd of the drain hose can be positioned in three ways