AEG 135 EL Water inlet, Water drainage, End of the drain hose can be positioned in three ways

Page 43

Installation

Water inlet

Connect the water inlet hose to a separate tap with a 3/4" thread after hav- ing inserted the small filter “A” supplied with the machine.

A

The other end of the inlet hose which connects to the machine can be turned in any direction. Simply loosen the fitting, rotate the hose and retighten the fitting, making sure there are no water leaks.

The inlet hose must not be lengthened. If it is too short and you do not wish to move the tap, you will have to purchase a new, longer hose spe- cially designed for this type of use.

Water drainage

The end of the drain hose can be positioned in three ways:

Hooked over the edge of a sink using the plastic hose guide supplied with the machine. In this case, make sure the end cannot come unhooked when the machine is emptying.

This could be done by tying it to the tap with a piece of string or attaching it to the

wall.

In a sink drain pipe branch. This branch must be above the trap so that the bend is at least 60 cm above the ground.

84

Image 43
Contents Lavamat 135 EL Dear customer Contents Page Follow the instructions for positioning and connection Safety instructionsGeneral notes Positioning, connection, starting upProper use Child safetyPackaging materials DiscardingMachine Tips for environmental protection Main features of your washing machine Front view Description of the applianceButtons and corresponding functions Control panelMains on light ON/OFF button Açma KapamaDisplay Delay Start button Geciktirme TU‚UDisplay shows the following information Anticrease button stop with water in drum Quick Wash button Kisa YikamaPrewash button ÖN Yikama Extra Rinse button EK DurulamaPause START/PAUSE button Start ARA VermeSpin Speed button Sikma StartProgramme selector Programme phase indicatorCancelling a programme Symbols on the programme selectorOpening the door after the programme has started Before the first wash Detergent and additive dispenser drawerSorting out and preparing the laundry Preparing the wash cycleColoureds 40 Types of fabric and care labelsWhites ColouredsWoollens and particularly delicate items Delicates 40Detergents and additives Add detergent and additive How to washSwitching the machine on Load the laundryCorresponding light comes on Selection of the desired wash programmeSelection of the spin speed Spin Speed Sikma button the corre Sponding light comes onStarting the programme Selection of the Delay Start option Geciktirme TU‚UAt the end of the programme Wash programmes Programme chartWash Temp Fabrics Additional Max Consumption Type Special programmesMax Consumption Laundry Detergent dispenser drawer Cleaning and maintenancePeriodical cleaning Bodywork After each washWater inlet filter Drain filterEmergency emptying out Frost precautionsProblem Possible cause Solution TroubleshootingSomething not working? Possible cause Solution ProblemFeet have not been Problem Possible cause Solution White residue is left on the laundry Unsatisfactory washing resultsIf grey stains remain on the laundry Foam is still visible even after the last rinseThis appliance complies with the following EC directives Technical dataService Safety instructions Instructions for installation and electrical connectionRear view Dimensions of the applianceUnpacking InstallationLevelling PositioningBefore placing it on small tiles, apply a rubber coating Not more than 90 cm End Electrical connectionPermanent connection Directly into aWater drainage Water inletEnd of the drain hose can be positioned in three ways