AEG 135 EL manual Selection of the Delay Start option Geciktirme TU‚U, Starting the programme

Page 24

GECIKTIRME

TUSU

How to wash

Selection of the DELAY START option (GECIKTIRME TU‚U)

To delay starting of a programme, press the DELAY START (GECIKTIRME TU‚U) button before starting the machine. The figures corresponding to the selected delay will be displayed for about 2 seconds, after which

the duration of the selected programme will appear on the display.

When the START/PAUSE (START ARA VERME) button is pressed, the selected delay will again appear on the display and the machine starts its countdown.

Starting the programme

To start the selected programme, press the START/PAUSE (START ARA VERME) button; the corresponding light stops flashing and the door locked pilot light comes on to indicate that the door locking safety device is in operation.

The pilot light corresponding to the wash phase which is running also comes on.

After about 30 seconds the programme starts.

START

ARA VERME

Image 24

Contents Lavamat 135 EL Dear customer Contents Page Safety instructions General notesPositioning, connection, starting up Follow the instructions for positioning and connectionChild safety Proper useDiscarding Packaging materialsMachine Tips for environmental protection Main features of your washing machine Description of the appliance Front viewControl panel Mains on lightON/OFF button Açma Kapama Buttons and corresponding functionsDelay Start button Geciktirme TU‚U DisplayDisplay shows the following information Quick Wash button Kisa Yikama Prewash button ÖN YikamaExtra Rinse button EK Durulama Anticrease button stop with water in drumSTART/PAUSE button Start ARA Verme Spin Speed button SikmaStart PauseProgramme phase indicator Cancelling a programmeSymbols on the programme selector Programme selectorOpening the door after the programme has started Detergent and additive dispenser drawer Before the first washPreparing the wash cycle Sorting out and preparing the laundryTypes of fabric and care labels WhitesColoureds Coloureds 40Delicates 40 Woollens and particularly delicate itemsDetergents and additives How to wash Switching the machine onLoad the laundry Add detergent and additiveSelection of the desired wash programme Selection of the spin speedSpin Speed Sikma button the corre Sponding light comes on Corresponding light comes onSelection of the Delay Start option Geciktirme TU‚U Starting the programmeAt the end of the programme Programme chart Wash programmesWash Temp Fabrics Additional Max Consumption Special programmes TypeMax Consumption Laundry Cleaning and maintenance Periodical cleaning BodyworkAfter each wash Detergent dispenser drawerDrain filter Water inlet filterFrost precautions Emergency emptying outTroubleshooting Problem Possible cause SolutionSomething not working? Problem Possible cause SolutionFeet have not been Problem Possible cause Solution Unsatisfactory washing results If grey stains remain on the laundryFoam is still visible even after the last rinse White residue is left on the laundryTechnical data This appliance complies with the following EC directivesService Instructions for installation and electrical connection Safety instructionsDimensions of the appliance Rear viewInstallation UnpackingPositioning LevellingBefore placing it on small tiles, apply a rubber coating Electrical connection Permanent connectionDirectly into a Not more than 90 cm EndWater inlet Water drainageEnd of the drain hose can be positioned in three ways