AEG 135 EL manual Something not working?, Troubleshooting, Problem Possible cause Solution

Page 31

Something not working?

If, during the spin cycle, the machine makes an unusual whistling noise, different from the noise made

by traditional washing machines, this is due to a new type of motor.

If water is not visible in the drum, this is due to the modern technology of new washing machines that use less water than traditional machines.

Troubleshooting

If a problem arises, you can try to solve it yourself following the instructions below. If you call out an engineer when one of the follow- ing problems arises, or to repair a fault due to incorrect use, the call- out will be charged even if requested within the guarantee period.

During machine operation the following alarm codes may be displayed:

-E00: problem with the water supply

-E10: problem with water draining

-E20: door open

Once the problem has been eliminated, press the START/PAUSE button to restart the programme. If after all checks, the problem persists, con- tact your local Service Centre.

Problem

 

Possible cause

 

Solution

 

 

 

 

 

 

 

 

 

 

 

The ON/OFF (AÇMA

 

Depress the button.

 

 

KAPAMA button) has not

 

 

 

 

been depressed.

 

 

 

 

The main electrical fuse

 

Replace the fuse.

 

 

has blown.

 

 

 

 

The door is not properly

 

Close the door; the click

The machine does not work

 

closed (E20).

 

of the lock should be heard.

 

The plug is not connected.

 

Insert the plug.

 

 

The START ARA VERME

 

Press the button.

 

 

button has not been pressed.

 

 

 

 

The programme selector

 

Set the selector to the

 

 

has not been set correctly.

 

chosen programme.

 

 

The GECIKTIRME TU‚U

 

Check the selected delay on

 

 

option has been selected.

 

the display.

73

Image 31
Contents Lavamat 135 EL Dear customer Contents Page Follow the instructions for positioning and connection Safety instructionsGeneral notes Positioning, connection, starting upProper use Child safetyPackaging materials DiscardingMachine Tips for environmental protection Main features of your washing machine Front view Description of the applianceButtons and corresponding functions Control panelMains on light ON/OFF button Açma KapamaDisplay Delay Start button Geciktirme TU‚UDisplay shows the following information Anticrease button stop with water in drum Quick Wash button Kisa YikamaPrewash button ÖN Yikama Extra Rinse button EK DurulamaPause START/PAUSE button Start ARA VermeSpin Speed button Sikma StartProgramme selector Programme phase indicatorCancelling a programme Symbols on the programme selectorOpening the door after the programme has started Before the first wash Detergent and additive dispenser drawerSorting out and preparing the laundry Preparing the wash cycleColoureds 40 Types of fabric and care labelsWhites ColouredsWoollens and particularly delicate items Delicates 40Detergents and additives Add detergent and additive How to washSwitching the machine on Load the laundryCorresponding light comes on Selection of the desired wash programmeSelection of the spin speed Spin Speed Sikma button the corre Sponding light comes onStarting the programme Selection of the Delay Start option Geciktirme TU‚UAt the end of the programme Wash programmes Programme chartWash Temp Fabrics Additional Max Consumption Type Special programmesMax Consumption Laundry Detergent dispenser drawer Cleaning and maintenancePeriodical cleaning Bodywork After each washWater inlet filter Drain filterEmergency emptying out Frost precautionsProblem Possible cause Solution TroubleshootingSomething not working? Possible cause Solution ProblemFeet have not been Problem Possible cause Solution White residue is left on the laundry Unsatisfactory washing resultsIf grey stains remain on the laundry Foam is still visible even after the last rinseThis appliance complies with the following EC directives Technical dataService Safety instructions Instructions for installation and electrical connectionRear view Dimensions of the applianceUnpacking InstallationLevelling PositioningBefore placing it on small tiles, apply a rubber coating Not more than 90 cm End Electrical connectionPermanent connection Directly into aWater drainage Water inletEnd of the drain hose can be positioned in three ways