TROUBLESHOOTING CONT.
CHECK THESE POINTS IF YOUR WASHER...
Won’t Fill
Won’t Tumble
Door Locked Shut;
Will Not Open
Freshening
Your Washer
Is Noisy
•Be sure the door is tightly closed.
•Plug cord into a live electrical outlet.
•Check fuse or reset circuit breaker.
•Press the START/PAUSE pad.
•Turn both faucets on fully.
•Straighten inlet hoses.
•Disconnect hoses and clean screens. Hose filter screens may be plugged.
•Open and close the door, then push the START/PAUSE pad.
•Check fuse or reset circuit breaker.
•Close the door and press the START/PAUSE pad. For your safety, the washer will not tumble or spin unless the door is closed.
•Press the START/PAUSE pad to stop the machine.
•It may take a few moments for the door lock mechanism to disengage.
•See Cleaning the Interior, page 8.
•Washer should be leveled properly as outlined in installation instructions.
•Check that the leveling leg lock nuts are tightened.
•Be sure rubber feet are installed on leveling legs.
•Weak floors can cause vibration and walking.
•For information on normal operating sounds, see page 13.
For further assistance, call Maytag Services, LLC
U.S. customers using TTY for deaf, hearing impaired or speech impaired, call
11