JVC KS-LH60R manual RDS Operations, What you can do with RDS, To use Network-Tracking Reception

Page 12

RDS OPERATIONS

ENGLISH

What you can do with RDS

RDS (Radio Data System) allows FM stations to send an additional signal along with their regular programme signals. For example, the stations send their station names, as well as information about what type of programme they broadcast, such as sports or music, etc.

Another advantage of RDS function is called “Enhanced Other Networks.” By using the Enhanced Other Networks data sent from a station, you can tune in to a different station of a different network broadcasting your favorite programme or traffic announcement while listening to another programme or to another source such as tape.

By receiving the RDS data, this unit can do the following:

•Tracing the same programme automatically (Network-Tracking Reception)

•Standby Reception of TA (Traffic Announcement) or your favorite programme

•PTY (Programme Type) search

•Programme search

•And some other functions

Tracing the same programme automatically (Network-Tracking Reception)

When driving in an area where FM reception is not good, the tuner built in this unit automatically tunes in to another RDS station, broadcasting the same programme with stronger signals. So, you can continue to listen to the same programme in its finest reception, no matter where you drive. (See the illustration on page 18.)

Two types of the RDS data are used to make Network-Tracking Reception work correctly —PI (Programme Identification) and AF (Alternative Frequency).

Without receiving these data correctly from the RDS station you are listening to, Network- Tracking Reception will not operate.

To use Network-Tracking Reception

You can select the different modes of network- tracking reception to continue listening to the same programme in its finest reception.

When shipped from the factory, “AF” is selected.

• AF:

Network-Tracking Reception is

 

activated with Regionalization set to

 

“off.”

 

With this setting, the unit switches to

 

another station within the same

 

network when the receiving signals

 

from the current station become

 

weak. (In this mode, the programme

 

may differ from the one currently

 

received.)

 

The AF indicator lights up but the

 

REG indicator does not.

•AF REG: Network-Tracking Reception is activated with Regionalization set to “on.”

With this setting, the unit switches to another station, within the same network, broadcasting the same programme when the receiving signals from the current station become weak.

Both the AF indicator and the REG indicator light up.

• OFF:

Network-Tracking Reception is

 

deactivated.

 

 

 

 

Neither the AF indicator nor the REG

 

indicator lights up.

 

AF indicator

 

 

 

REG indicator

 

 

 

 

 

 

Note:

If a DAB tuner is connected and Alternative Reception (for DAB services) is activated, Network-Tracking Reception (“AF”) is also activated automatically. On the other hand, Network-Tracking Reception cannot be deactivated without deactivating Alternative Reception. (See page 39.)

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents KS-LH60R How to reset your unit How to use the M Mode buttonIndicator lights up Contents Location of the Buttons Control panelDisplay window Remote controller Preparing the remote controller Installing the batteryRemove the battery holder Place the batteryTurning on the power To drop the volume in a momentTo turn off the power Basic OperationsSetting the clock Finish the settingSet the minute Set the clock systemRadio Operations Listening to the radioSearching a station automatically Auto search Searching a station manually Manual searchFM station automatic preset SSM When an FM stereo broadcast is hard to receiveStoring stations in memory Manual preset Tune in to a station in this example, of 92.5 MHzFM 1 FM 2 FM 3 a M F1 F2 F3 FollowsRDS Operations What you can do with RDSTo use Network-Tracking Reception Using TA Standby Reception Press T TP/PTY again. The TP indicator goes OffPress T TP/PTY to activate TA Standby Reception To deactivate the TA Standby ReceptionUsing PTY Standby Reception To deactivate the PTY Standby ReceptionSearching your favorite programme To store your favorite programme typesSelect one of the twenty-nine PTY Codes. SeeTo activate programme search, follow the procedure below To search your favorite programme typePress and hold T TP/PTY for more Than 2 seconds while listening to anSetting the TA volume level Automatic clock adjustmentChanging the display mode while listening to an FM station PS NamePTY codes Same programme can be received on different frequenciesTape Operations Listening to a cassetteTo stop play and eject the cassette To fast-forward and rewind a tapeTo cancel the Dolby B NR, repeat steps Finding the beginning of a tuneDolby B NR To play back tapes recorded withSkipping the blank portions on the tape You can skip blank portions between the tunes Blank SkipNow Blank Skip is Activated To cancel the prohibition and unlock the cassette Prohibiting cassette ejectionPlaying the current tune repeatedly Sound Adjustments Selecting preset sound modes C-EQ custom equalizerUser Rock Classic Jazz HIP HOP PopsAdjusting the sound Select the item you want to adjustAdjust the setting Repeat steps 1 and 2 to adjust the other itemsBasic Procedure Ex. When you select AudioEx. When you select Level Other Main FunctionsPreferred Setting Mode PSM items IndicationsSee 24H/12HTo set the clock display-CLOCK To select the level meter-LEVELTo select the dimmer mode-DIMMER To select the telephone muting-TELTo select the scroll mode-SCROLL To turn the tag display on or offTo turn on/off the key-touch tone-BEEP To select the external component to useConnectors Detaching the control panelAttaching the control panel CD Changer Operations About MP3 discsPlaying discs Select the CD changer CDTo change the display information Track title file name*5Elapsed playing time Current file number For MP3 discsTo go to a particular disc directly To fast-forward or reverse the track/fileTo go to the next or previous tracks/files Disc title / performer Track titleHow to go to the desired track/file quickly To go to a track/file quicklyTo skip to the next or previous folder only for MP3 discs To play back tracks/files at random Random PlayDisc RND MAG RND TRK RPT Fldr RPTExternal Component Operations Select the external component LineTape Line What is DAB system? DAB Tuner OperationsSelect the DAB tuner DAB FM/AMStoring DAB services in memory To restore the FM/AM tunerTo tune in to a particular ensemble without searching Tuning in to a preset DAB service To select the next service To select the previous serviceTo adjust the DAB volume level While receiving a DAB serviceWhat you can do more with To use Alternative ReceptionTroubleshooting Symptoms Causes RemediesConnections TapeChanger Maintenance To clean the headTo keep the tape clean Ignition key-off release/Ignition key-on playSpecifications MW TunerLW Tuner Having Trouble with operation? Vor dem Einbau Drücken Sie Avant le montage Appuyer surVoordat u aan de montage van het apparaat Begint Druk opHinweis Be sure to ground this unit to the car’s chassisSicherstellen, daß das Gerät am Fahrwerk geerdet wird RemarqueNE Connectez PAS les fils d’enceintes du Sonst das Gerät schwer beschädigt wirdZal het apparaat ernstige schade oplopen Si le câblage des enceintes de votre voitureBlue with white stripe To power aerial if any You can connect another power amplifier for front speakersSteering wheel remote controller equipped in the car Lenkradfernbedienung im Fahrzeug installiert
Top Page Image Contents