ENGLISH
How to reset your unit
After detaching the control panel, press the reset button on the panel holder using a
This will reset the
Note:
Your preset
How to use the M (MODE) button
If you press M (MODE), the unit goes into functions mode (“MODE” flashes on the upper part of the display). While in functions mode, the number buttons work as different function buttons.
•When connecting a JVC
Ex.: When number button 2 works as MO (monaural) button.
MO (monaural) | Time countdown |
indicator lights up. | indicator |
To use these buttons for original functions again after pressing M (MODE), wait for 5 seconds
without pressing any of these buttons until the functions mode is cleared (“MODE” disappears from
the display).
• Pressing M (MODE) again also clears the functions mode.
2