Smeg WM40T-1 Placement of the clothes into the machine, Filling detergent in the machine

Page 11

Pull the textiles like trousers,knitted fabric,t-shirt and sweat shirt inside out.

Wash your small clothes like socks and handkerchiefs in a washing bag.

Wash up tol 90 ˚C Wash up to 60 ˚C Wash up to 30 ˚C Not washable in washing machine

Placement of the clothes into the machine

Open the door of your machine.

Fill your clothes in your machine in a well-spread manner.

Place each cloth separately.

When you shut the door of your machine, be careful that no cloth is jammed between the cover and the gasket.

Shut the door of your machine tightly otherwise your machine will not start the washing process.

Filling detergent in the machine

The quantity of the detergent that you will fill in your machine depends on the following criteria:

Your detergent consumption will change according to the dirtiness level of your clothes. For your slightly dirty clothes, do not pre-wash and put a small amount of detergent in the compartment no.2 of the detergent drawer.

For your excessively dirty clothes, select a program with pre- washing, fill ¼ portion of the detergent you will put in compartment

1 in the detergent drawer and the remaining portion in compartment 2.

In your machine,use the detergents developed especially for automatic washing machines. The quantities that will be used for your clothes are written on the packing of the detergents.

As the hardness of your water increases, the amount of the detergent to be consumed will also increase.

As the amount of your clothes increases, the amount of the detergent to be consumed will also increase.

Fill your softener in the softener compartment in your detergent drawer. Do not exceed the MAX level. Otherwise, the softener will diffuse in the washing water via the siphon.

The softeners with high density should be diluted with some water before filling in the drawer. That is because the softener with high density obstructs the siphon and prevents the flow of the softener.

38

Image 11
Contents Maintenance and Cleaning Contents Before UsingInstallation Technical Specifications Control PanelRecommendations Before UsingSafety Warnings Removal of Transportation Screws InstallationAdjustment of Feet Water Supply Connection Electrical ConnectionWater Drain Connection Technical Specifications WM40T-1 Control PanelNo spin Function Indicator LightsSTART/PAUSE Button Function ButtonsProgram Knob Temparature Adjustment KnobBefore Washing Discrimination of your laundry Washing Your LaundryFirst wash cycle Filling detergent in the machine Placement of the clothes into the machineStart/Pause Running the MachineWater Inlet Filters Maintenance and CleaningChild lock Cotton 60˚ Prewash Continue Detergent Drawer Drum Siphon PlugCabinet Remove of Lime from Your MachinePractical Information Pump Filter Avoiding Minor Faults Methods Elimination Failure Probable CauseFailure Probable Cause Methods of Elimination Failure Probable Cause Methods Elimination Automatic Failure Detection System Failure Probable Process Code Indicator To be DoneTurn on the tap Failure Probable Process Code Indicator To be Done International Washing Signs 52010077