Smeg WM40T-1 technical specifications Failure Probable Cause Methods Elimination

FAILURE	PROBABLE CAUSE	METHODS OF
		ELIMINATION
	Clothes exceeding the	Put the clothes in your
	maximum capacity	machine in a manner
	has been filled in your	not to exceed its
	machine.	maximum capacity.
The washing result is		Use the amount of
	Your water may be	detergent according to
not good.	hard.	the declaration of the
		detergent producer.
	Distribution of the	Spread the clothes
	clothes in your	inside the machine in
	machine is not well-	an orderly and well-
	balanced.	balanced manner .
The water is drained	The end of the water	Place the water drain
	drain hose is in a
from the machine as	position too low	hose in an appropriate
soon as it is filled.	according to the	height.(**)
	machine.
No water is seen in the	No failure. The water is	-
	at the lower part of the
drum during washing.
	drum.
		By calibrating your
There are residues of	The pieces of some	machine for “Rinsing”
	detergents which do	program,make an
detergent on the	not dissolve in water	additional rinsing or
clothes.	may stick to your	eliminate the stains
	clothes as white stains.	After drying with the
		help of a brush.
	These stains may be	In the next washing
There are gray stains		operation, use the
	caused by oil,cream or	maximum detergent
on the clothes.
	ointment .	amount declared by
		the detergent producer.

(**)See the section concerning instalations your machine.

50