Smeg WM40T-1 technical specifications Water Drain Connection

Page 5

Cold water inlet

WATER DRAIN CONNECTION

•Be sure that water inlet hoses are not folded, twisted, crushed or elongated by stretching.

•Water drain hose should be mounted at a height of minimum 60 cm, maximum 100 cm from the ground.

•The end of the water drain hose may directly be fitted to the dirty water outlet hole or a special apparatus mounted on the outlet bracket of the wash-stand.

•Never attempt to extend the water drain hose by adding extra parts.

Image 5

Contents Installation Contents Before UsingTechnical Specifications Control Panel Maintenance and CleaningRecommendations Before UsingSafety Warnings Removal of Transportation Screws InstallationAdjustment of Feet Water Supply Connection Electrical ConnectionWater Drain Connection Technical Specifications WM40T-1 Control PanelSTART/PAUSE Button Function Indicator LightsFunction Buttons No spinProgram Knob Temparature Adjustment KnobBefore Washing Discrimination of your laundry Washing Your LaundryFirst wash cycle Filling detergent in the machine Placement of the clothes into the machineStart/Pause Running the MachineWater Inlet Filters Maintenance and CleaningChild lock Cotton 60˚ Prewash Continue Detergent Drawer Cabinet Siphon PlugRemove of Lime from Your Machine DrumPractical Information Pump Filter Avoiding Minor Faults Methods Elimination Failure Probable CauseFailure Probable Cause Methods of Elimination Failure Probable Cause Methods Elimination Automatic Failure Detection System Failure Probable Process Code Indicator To be DoneTurn on the tap Failure Probable Process Code Indicator To be Done International Washing Signs 52010077