Smeg WM40T-1 technical specifications Failure Probable Cause, Methods Elimination

FAILURE	PROBABLE CAUSE
	It is unplugged.
	Your fuse is defected.
	The electric power is
	off.
Your machine does not	Start/pause button has
	not been pressed.
operate.
	The program knob is in
	O(off) status.
	The door is not shut
	properly.
	Water tap is closed.
	The water inlet hose
	may be bent.
Your machine does not	The water inlet hose is
	obstructed.
receive water.	The valve inlet filter is
	obstructed.
	The door is not shut
	properly.
	The drain hose is
	obstructed or bent.
Your machine is not	The pump filter is
	obstructed.
draining water.	The clothes are not
	placed inside the
	machine in a well-
	balanced manner.
	The feet of your
Your machine is	machine are not
	adjusted.
vibrating.
	Transportation screws
	are not removed.

METHODS OF

ELIMINATION

Insert the plug into the socket.

Change your fuse.

Check the electric power.

Press the start/pause button.

Bring the program knob on the desired status.

Shut the door properly. You should hear the click.

Open water tap.

Check the water inlet hose.

Clean the filters of water inlet hose. (*)

Clean the valve inlet filters. (*)

Shut the door properly. You should hear the click.

Check the drain hose.

Clean the pump filter.

(*)

Spread the clothes inside the machine in an orderly and well- balanced manner.

Adjust the feet. (**)

Remove transportation screws. (**)

(*)See the section concerning the maintenance and cleaning of your machine. (**)See the section concerning installations your machine.

48