Smeg WM40T-1 technical specifications Failure Probable Cause Methods of Elimination

Page 22

FAILURE

PROBABLE CAUSE

 

 

 

 

METHODS OF ELIMINATION

Your machine is vibrating.

There is a small amount of clothes in the device.

Excessive amount of clothes are filled in the machine or the clothes are not placed in a well-balanced manner.

Your machine touches a ripid object.

It does not prevent operation of the machine.

Do not exceed the recommended quantity of clothes and spread your clothes in the machine in a well- balanced manner.

Prevent your machine’s leaning on a tough place .

Too much detergent has been used.

Excessive foam in the detergent drawer.

Wrong detergent has been used.

Press the start/pause button.In order to stop the foam,dilute one table-spoon of softener in half liter of water and pour it in the detergent drawer.Press the start/pause button after 5-10 minutes.Arrange the amount of the detergent properly in the next washing process.

Use only the detergents produced for full automatic machines.

The washing result is bad.

Your laundry too dirty for the program you have selected.

The amount of detergent used is not sufficient.

Select a suitable program. (see Table-1)

Use more detergent according to the detergent.

49

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Technical Specifications Control Panel Contents Before UsingInstallation Maintenance and CleaningSafety Warnings Before UsingRecommendations Adjustment of Feet InstallationRemoval of Transportation Screws Electrical Connection Water Supply ConnectionWater Drain Connection Technical Specifications Control Panel WM40T-1Function Buttons Function Indicator LightsSTART/PAUSE Button No spinTemparature Adjustment Knob Program KnobFirst wash cycle Washing Your LaundryBefore Washing Discrimination of your laundry Placement of the clothes into the machine Filling detergent in the machineRunning the Machine Start/PauseChild lock Maintenance and CleaningWater Inlet Filters Cotton 60˚ Prewash Continue Detergent Drawer Remove of Lime from Your Machine Siphon PlugCabinet DrumPractical Information Pump Filter Avoiding Minor Faults Failure Probable Cause Methods EliminationFailure Probable Cause Methods of Elimination Failure Probable Cause Methods Elimination Failure Probable Process Code Indicator To be Done Automatic Failure Detection SystemTurn on the tap Failure Probable Process Code Indicator To be Done International Washing Signs 52010077
Top Page Image Contents