Failure Probable Process Code Indicator To be Done


FAILURE	FAILURE	PROBABLE	THE PROCESS
CODE	INDICATOR	FAILURE	TO BE DONE

		The heater of your	Shut down your
	The start/pause	The heater of your	machine and
	The start/pause	machine or the	unplug. Turn off
Err 05	light and program	machine or the	unplug. Turn off
Err 05	light and program	heat sensor has	your tap and apply
	end light blink.	heat sensor has	your tap and apply
	end light blink.	failed.	to the nearest
		failed.	to the nearest
			authorized service.

	The program		Shut down your
	The program		machine and
Err 06	ready light and	The motor has	unplug. Turn off
Err 06	program end light	failed.	the tap and apply
	program end light	failed.	the tap and apply
	blink.		to the nearest
			authorized service.

	The program		Shut down your
	start/pause light,		machine and
Err 07	ready light and	Configuration	unplug. Turn off
Err 07	program end light	error.	the tap and apply
	program end light	error.	the tap and apply
	stays on		to the nearest
	permanently.		authorized service.

	The start/pause		Shut down your
	The start/pause		machine and
	light,program		machine and
	light,program		unplug. Turn off
Err 08	ready light and	Fault error	unplug. Turn off
Err 08	ready light and	Fault error	the tap and apply
	program end light		the tap and apply
	program end light		to the nearest
	blink.		to the nearest
	blink.		authorized service.
			authorized service.

			If the network
			voltage is lower
			than 150V or
	The program		higher than 260V,
	The program	The network	your machine will
	ready light and		your machine will
	ready light and		automatically stop.
Err 09	program end light	voltage is too high	automatically stop.
Err 09	program end light	voltage is too high	When the network
	stays on	or too low.	When the network
	stays on	or too low.	voltage is
	permanently.		voltage is
	permanently.		recovered, your
			recovered, your
			machine will
			continue its
			operation.

FAILURE

PROBABLE

THE PROCESS

CODE

INDICATOR

TO BE DONE