Smeg WM40T-1 technical specifications Before Using, Safety Warnings, Recommendations

Page 2

SECTION 1:BEFORE USING

SAFETY WARNINGS

Do not use a multiple socket or extension cord.

Do not insert a plug with damaged or broken cord into the socket.

If the cord is damaged it should be replaced by the manufacturer or appointed service agent in order to avoid a hazard.

Never remove the plug from the socket by pulling from the cord section. Remove the plug by holding.

Do not plug the power supply with wet hands.

Never touch the machine with wet hands or feet.

Never open the detergent drawer while the device is running.

Never force to open the door of the machine while the machine is running.

Since the machine can reach high temperatures while running, do not touch the drain hose and water during draining.

In case of any failure, first unplug the device and close the water tap. Do not attempt to repair.Please apply to the nearest authorized service station.

Do not forget that the packing material of your machine may be hazardous for children.

Do not let your children play with the washing machine.

Keep your pet away from your machine.

Your machine should only be used by adults within the information written in this manual.

Your machine is designed for use in house environment. Warranty will be invalid if you use it for commercial purposes.

The appliance should not be put on a carpet which can block the air ventilation on the bottom side.

RECOMMENDATIONS

The detergent or softener in contact with air for a long time will dry and stick to your detergent drawer.To avoid this put your detergent and softener into the detergent drawer just before washing.

It is recommended that you use pre-washing program for only very dirty clothes.

Please do not exceed the maximum loading capacity.

29

Image 2
Contents Technical Specifications Control Panel Contents Before UsingInstallation Maintenance and CleaningRecommendations Before UsingSafety Warnings Removal of Transportation Screws InstallationAdjustment of Feet Electrical Connection Water Supply ConnectionWater Drain Connection Technical Specifications Control Panel WM40T-1Function Buttons Function Indicator LightsSTART/PAUSE Button No spinTemparature Adjustment Knob Program KnobBefore Washing Discrimination of your laundry Washing Your LaundryFirst wash cycle Placement of the clothes into the machine Filling detergent in the machineRunning the Machine Start/PauseWater Inlet Filters Maintenance and CleaningChild lock Cotton 60˚ Prewash Continue Detergent Drawer Remove of Lime from Your Machine Siphon PlugCabinet DrumPractical Information Pump Filter Avoiding Minor Faults Failure Probable Cause Methods EliminationFailure Probable Cause Methods of Elimination Failure Probable Cause Methods Elimination Failure Probable Process Code Indicator To be Done Automatic Failure Detection SystemTurn on the tap Failure Probable Process Code Indicator To be Done International Washing Signs 52010077