Installation and Connection Instructions | 4 | ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| CAUTION |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Ensure that the machine is installed on a level floor of |
|
|
|
|
|
|
| sufficient strength and that the recommended clearances |
|
|
|
|
|
|
| for inspection and maintenance are provided. Never |
|
|
|
|
|
|
| allow the inspection and maintenance space to be |
|
|
|
|
|
|
| blocked. |
|
|
|
|
|
| Surface |
| ||
|
|
|
| The machine must be securely fixed on a flat surface (metal base, |
| ||
|
|
|
| concrete or solid ground). The anchoring is to be done on the |
| ||
|
|
|
| 6 provided places (A) (See Label 1) in the holes on the corner of the | |||
|
|
|
| base. (See Mounting Bolt Hole Locations) |
| ||
|
|
|
| The machine must be placed entirely level. For easy maintenance it |
| ||
|
| A | A | is recommended to keep a minimal distance of 600 mm - 23.62 inch |
| ||
Label 1
between the wall and the back of the machine.
If several machines are placed next to each another, there should be a minimal distance of 30 mm - 1.18 inch between each machine.
|
| D |
E |
| C |
F |
|
|
| D |
|
B | C | G |
| ||
|
| |
A |
|
|
Label 2
Anchoring on a metal base
The machines must be fixed on a metal base which is securely anchored on a concrete base. See Label 2.
WFF65/75/100 = WFF65, IWF065, IWF014, CWF065, CWF014, WFF75, IWF074, IWF018, CWF074, CWF018, WFF100, IWF100, IWF025, CWF100, CWF025
WFF135/165 = WFF135, IWF135, IWF030, CWF135, CWF030, WFF165, IWF165, CWF165
A: Bolt M12 (1/2”) (WFF65/75/100), M16 (5/8”) (WFF135/165)
B: Concrete base (WFF65/75/100: 25 cm - 9.48 inch, WFF135/165: 35 cm - 13.77 inch)
C: Washer 40x17x4 (1.57x0.60x0.15)
D: Nut M12 (1/2”) (WFF65/75/100), M16 (5/8”) (WFF135/165)
E: Base of the machine
F: Metal base
G: Bolt M16x60 (5/8” x 2 1/2”)
D |
E |
C |
B |
A |
Directly on the ground
The machine must be anchored directly on a concrete base. See Label 3.
A: Bolt M12 (1/2”) (WFF65/75/100), M16 (5/8”) (WFF135/165)
B: Concrete base (WFF65/75/100: 25 cm - 9.48 inch, WFF135/165: 35 cm - 13.77 inch)
C: Washer 40x17x4 (1.57x0.60x0.15)
D: Nut M12 (1/2”) (WFF65/75/100), M16 (5/8”) (WFF135/165)
E: Base of the machine
IMPORTANT: Machine bolts should be
Label 3
24