John Lewis JLWD 1610 instruction manual Cleaning the water inlet filters

Page 30

8.Remove foreign bodies and fluff from the pump seat and from the pump impeller.

9.Check carefully whether the pump impeller rotates (it rotates jerkily). If it doesn’t rotate, please contact your Service Centre.

10.Replace the filter into the pump by inserting it correctly into the special guides. Screw the pump cover firmly by turning it clockwise.

12. Close the pump door.

Warning!

When the appliance is in use and depending on the programme selected there can be hot water in the pump.

Never remove the pump cover during a wash cycle, always wait until the appliance has finished the cycle, and is empty. When refitting the pump cover, ensure it is securely re-tightened so as to stop leaks and young children being able to remove it.

11.Replace the emergency emptying cap into the filter cover and fix it firmly.

Cleaning the water inlet filters

Warning! If the appliance doesn't fill or it is taking longer to fill with water, check if the water inlet filters are blocked.

1.Turn off the water tap.

2.Unscrew the water inlet hose.

3.Clean the filter using a hard bristle brush.

30

Image 30

Contents Jlwd Spin washer-dryer Safety information General safetyInstallation UseChild safety Keep all detergents in a safe place out of children’s reachContents Use Drying Product description Control panel Detergent dispenser drawerAutomatic dry Programme DialSpin Time dryExtra Rinse Door lock light Delay StartDisplay Start PauseAcoustic signals First usePersonalisation Load the laundry Daily useChild lock Measure out the detergentSelect the spin speed or Rinse hold option Select the delay startSelect the required programme Select the desired optionsHow to change an option or a programme during its cycle How to interrupt a programmeStart the programme How to open the door during the cycle of a programme End of programmeUse Drying Drying onlyUse Washing & Drying NON-STOP programme Washing and Automatic DryingNON-STOP programme Washing and Timed Drying Before loading the laundry Helpful hints and tipsSorting out the laundry Removing stainsDetergents and additives Quantity of detergent to be usedDegrees of water hardness Laundry not suitable for drying Drying HintsPreparing the drying cycle Garment labelsEconomy Washing programmesAdditional drying White and fast coloured cotton heavily orSynthetics Synthetics Easy IronDelicates Rinses DrainDrying Programmes Minute washOff Automatic Programmes Timed ProgrammesProgramme Energy Water Technical dataConsumption values Duration MinutesCare and cleaning Cleaning the drawer recess Washing drumDoor seal Cleaning the pump Cleaning the water inlet filters Frost precautions Emergency emptying outInstallation UnpackingPositioning and levelling PlumbingWater inlet Water-stop deviceWater drainage Into a drainage standpipeOnto a sink outlet spigot Special conditions Interest of the environmentElectrical connection Appliance is supplied with a 13 amp plug fitted Permanent connectionWashing machine Problem Possible cause/SolutionWhat to do if… Does not startEmpty and/or does not Machine does not fillMachine does not SpinDoor will not open Unsatisfactory washingResults Machine vibratesRepairs After Sales Service Repairs After Sales Service0844 871 Packaging materials Environment concernsSpare parts Ecological hints132939140-A-022011