9. Press both journals of the large mesh filter into the brackets on the loading door until they snap into place.
10.
11. Press against the large mesh filter until it locks into the interlock.
6. Remove the fluff from fine filter. It is best to use a damp hand for this purpose.
Clean the entire filter area
The filter area does not have to be cleaned after every drying cycle, but should be checked regularly and cleaned of fluff if necessary.
7.To do this, grip the top of the large mesh filter and pull it forwards until it comes loose from the two brackets.
8.Remove fluff from the entire filter area. It is best to use a vacuum cleaner for this purpose.
If the fine filter is not fitted, the large mesh filter will not snap into place and the loading door cannot be closed.
Cleaning the door seal
Wipe the door seal with a damp cloth immediately after the drying cycle has finished.
Emptying the water reservoir
Empty the water reservoir after every drying cycle.
If the water reservoir is full, an active programme will break off automatically and the warning lamp Full tank lights. In order to continue the programme, the water reservoir must first be emptied.
18