John Lewis JLTDH15 instruction manual Installation and use, Drying tips

Page 16

Important! Before drying rack installation check the dryer drum. It must be empty! Sport shoes cannot be dry without the drying rack - drum damage.

Installation and use

1.Open the loading door.

2.Insert the rack carefully resting its two support brackets on the front of plastic flange.

3.Place the woollens or pair of sport shoes on the rack.

4.Select the suitable rack drying programme and drying time.

5.Press the START/PAUSE button.

6.When cycle is finished open the loading door and remove the woollens or shoes.

7.Turn the programme selector to OFF.

8.Take out the drying rack of the drum.

Drying tips

for the best drying result spread the woollens out loosely on the drying rack and roll it up

do not squash and fold the woollens

• open support and put sport shoes on it

the insoles should be placed beside the shoes on the drying rack and the shoelaces should be tied

16

Image 16
Contents Tumble dryer Important safety information General safetyUse InstallationCause an explosion. Only tumble dry items washed with water Child safety Environmental tipsEnvironmental information Spin the laundry well before dryingPage Contents Adjustable feet Description of the applianceProgramme selector and Off switch Control panelBefore first use Time button Display Dry timeProgramme chart Application/propertiesSorting laundry Sorting and preparing laundryPreparing laundry Switching machine on Daily useDoor opening and laundry loading Selecting the programmeIntensive AlarmAnti-crease Delay start Setting child lockTime Programme of 20 minutesStarting the programme Changing programmeOpen loading door For drying rack unpacking see Installation chapter Drying rackDrying cycle complete / removing laundry Open doorInstallation and use Drying tipsMaintenance and cleaning Cleaning fluff filterCleaning the door seal Emptying the water reservoirCleaning heat exchanger filters Water reservoir has a volume of approx litresPage Clean operating screen and housing Cleaning the drumWhen doing this, please use rubber gloves What to do ifReplacing the drum light Does not Filters not locked in place Into place CloseMachine settings Alarm permanent on/offAdjusting the level of conductivity Replace the defective bulb Screw cover back downTechnical information InstallationTransporting the appliance Removing transport safety packaging Appliance positioningElectrical connection Green and Yellow Earth Blue Neutral Brown LiveSymbol or coloured green and yellow Door reversalDrying rack unpacking Spare parts Repairs after sales serviceMod Page Page 136916260-B-102011