John Lewis JLTDH15 instruction manual Intensive, Anti-crease, Alarm

2.Press the Delicate button - the LED above is on.

To deselect the function press the Delicate button again. LED above is off.

Intensive

If the laundry is still damp after a standard drying programme, you can increase the drying result by using the Intensive function.

1.Choose the drying programme.

2.Press the Intensive button - the LED above is on.

To deselect the function press the Intensive button again. The LED above is off.

Anti-crease

This function prolongs the anti-crease phase to 90 mins in total. The drum rotates in intervals during this phase. The laundry therefore remains relaxed and free of creases.

To activate it:

1.Choose the drying programme.

2.Press the Anti-creasebutton - the LED above is on.

If this additional function is selected, the anti- crease phase at the end of the drying cycle is lengthened by 60 minutes. The laundry can be removed at any time during the anti- crease phase.

To deselect the function press the Anti- crease button again. The LED above is off. Press the Anti-creasebutton. A 90 minute anti-crease phase is set. The display now shows the anti-crease icon. If this additional function is selected, the anti-crease phase at the end of the drying cycle is lengthened by 60 minutes. The laundry can be removed at any time during the anti-crease phase.

Alarm

The appliance is supplied with the Alarm function deactivated.

When activated, the buzzer sounds:

–At the end of the cycle

–When the anti-crease phase starts or ends

–When the cycle is interrupted

To activate it:

1.Choose the drying programme.

2.Press the Alarm button - the LED above is on.

12