HP LC3700N manual Connecting the TV signal sources

To use a separate external amplifier or a stereo system, refer to “Connecting an external sound system” on page 24.

c

CAUTION: Unplug power for the TV and all connected components before attaching or connecting speakers.

1 Position the TV display upright on its stand.

2 Place a speaker onto the TV display and insert the screws to secure it. Use the long screws for the top and bottom, and the short screw in the middle.

Select models use only two screws.

3 Plug the speaker into the TV.

4 Repeat these steps for the other speaker.

Setting Up

Connecting the TV signal sources

The following is an explanation of the types of connections that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector, plug it into the antenna terminal at the rear of the TV set.

■A 75-ohm system is generally a round cable with an F-type connector that can easily be attached to a terminal without tools (sold separately).

■A 300-ohm system is a flat, twin-lead cable that can be attached to a 75-ohm terminal through a 300/75-ohm adapter (sold separately).

Setting Up 11