HP LC3700N manual Connecting cable or satellite with a set-top box, Removing CableCARD

Removing CableCARD

1Turn on the TV; see “Turning the TV On and Off (Standby)” on page 27.

2Check that the CableCARD upgrade screen is not displayed. If it is displayed, wait until it disappears.

3Check that the OPC light on the front of the TV is NOT red; see “Turning the TV On and Off (Standby)” on page 27. If it is red, wait for the OPC light to change or go out.

4Remove the CableCARD.

Disconnecting the cable antenna when using CableCARD

1Turn on the TV; see “Turning the TV On and Off (Standby)” on page 27.

2Check that the CableCARD upgrade screen is not displayed. If it is displayed, wait until it disappears.

3Check that the OPC light on the front of the TV is NOT red. If it is, wait for it to change or go out.

4Disconnect the cable antenna.

For more information about CableCARD, refer to “Using the CableCARD Menu” on page 62.

Connecting cable or satellite with a set-top box

Connecting your TV directly to the audio and video output of your set-top box assures a more vivid picture and enhances your viewing enjoyment.

Optional equipment and all cables are sold separately.

You can connect a digital TV set-top box (air or cable) and other audiovisual equipment by using:

■Input 1 terminals with either component or composite video connections

■Input 2 terminals with either component or composite video connections

■Input 4 terminals with HDMI connection

■Input 5 terminals with DVI connections

n

If your cable TV company has CableCARD available, you can also use the CableCARD to receive HDTV programs. See “Using a CableCARD” on page 13.

c

CAUTION: Unplug power for the TV and all connected components before connecting the set-top box.

1Connect the set-top box input source cable(s) to the back of the TV using one of the terminals sets.

■Input 1 (A) or Input 2 (E) using component connections. (Input 1 shown.)

UpSetting

A

E

B

C

D

Setting Up 15