Operating an i.LINK device

1Connect an i.LINK device to the TV. For information on connecting an i.LINK device, see “Connecting an i.LINK device” on page 19.

2Press the i.LINK button on the remote control to open the i.LINK control panel.

3Use the arrow buttons on the remote control to highlight a function and press Select.

Or

Use the Record, Stop, Rewind, Fast-Forward, Pause, and Play buttons to operate the i.LINK device.

4Press the i.LINK button to hide the i.LINK control panel.

About i.LINK

i.LINK is an interface connection using a serial transfer system that transfers multimedia data, such as digital images and digital sound, between devices that have i.LINK terminals.

i.LINK is a term defined in the IEEE 1394 (Institute of Electrical and Electronics Engineer) standard. Currently, the transfer speeds are at 100 Mbps, 200 Mbps, and 400 Mbps, each of them expressed as S100, S200, and S400 respectively. The maximum speed for this TV is 400 Mbps.

i.LINK devices that can be connected

Only D-VHS decks, AV HDD recorders, and Blu-ray Disc recorders can be connected to this TV with i.LINK. Device recognition, control, recording, and playback operations may not be possible on some devices. Other devices such as DVD recorders, digital video cameras, PCs, or PC peripheral devices do not meet the specifications for this TV and cannot be connected with i.LINK.

Materials that can be recorded with i.LINK

Only digital programs can be recorded by i.LINK devices connected to this TV using i.LINK. i.LINK recording is not compatible with analog broadcasts or external input signals (Inputs 1 through 5).

Setting the recording mode (i.LINK)

The function for automatically adjusting the recording mode of connected i.LINK devices can be turned on or off. Most of the currently available i.LINK devices automatically recognize the transfer rates of the pictures and sound being recorded. These devices control the recording mode accordingly. Set this Mode to Pass through in normal circumstances.

Depending on the i.LINK devices used and the type of broadcast being recorded, this TV may not adjust the recording mode properly. In this case, set the recording mode to Pass through.

1Press the Menu button on the remote and the menu screen displays.

2Press the up arrow and down arrow buttons on the remote control to highlight Digital Setup, and press Select.

3Press the up arrow and down arrow buttons on the remote control to highlight i.LINK Setup, and then press Select.

4Press the up arrow and down arrow buttons on the remote control to highlight Recording Mode, and then press Select.

5Press the left arrow and right arrow buttons on the remote control to select Auto or Pass through, and then press Select.

Normally, this should be set to Pass through.

6Press the Menu button to view the display.

Setting the standby mode (i.LINK)

Power consumption during standby mode can be minimized by changing the setting of the Standby Mode in i.LINK Setup. When i.LINK is not in use, select Inactive in Standby Mode.

1Press the Menu button on the remote control, and the menu screen displays.

2Press the up arrow and down arrow buttons on the remote control to highlight Digital Setup, and press Select.

Using the Remote Control

Using the Remote Control 37

Page 47
Image 47
HP LC3700N Operating an i.LINK device, About i.LINK, Setting the recording mode i.LINK, Setting the standby mode i.LINK