1Carefully place the TV with the glass screen facing downward on a padded, stable table. Position the bottom of the TV near the edge of the table.
Refer to the figures in “Removing or attaching the stand” on page 8.
w
WARNING: The stand is heavy. Do not drop the stand onto the TV.
2Proceed with the steps for your type TV stand:
■For a
■For a
3For the TV with a
4Carefully lift the TV and set it upright. This completes stand installation for this type stand.
5For the TV with a
(C) in the mounting area of the TV from the slot for the pedestal leading edge. (Refer to the figure in step 6 of the previous procedure.) Hold the stand with the front (thin) edge pointing down and the pedestal horizontal. Lower the stand onto the TV with the pedestal in the mounting area. Then, slide the stand forward until the leading edge is underneath the tabs (C) and the screw holes (D) align.
6Insert the screws into the four holes (D).
7Position the pedestal cover (B) over the pedestal, tip the cover to place the top edge into the mounting area, and then lower the cover onto the pedestal. (Refer to the figure in step 5 of the previous procedure.) Move the cover to align the cover with the screw hole, and insert the retaining screw.
8Carefully lift the TV and set it upright. This completes stand installation for this type stand.
Setting Up the TV
Set up the TV by attaching and connecting the display speakers, connecting cables, and connecting the power cord. Some TV models come with speakers attached.
Attaching and connecting the display speakers
Speakers with speaker cables attach to each side of the display. The right speaker is located on the right side of the display when it is viewed from the front.
The TV has a digital audio output that you can connect to a separate external amplifier.
10HP Pavilion LCD HDTV User’s Guide
