3Press the up arrow and down arrow buttons on the remote control to highlight i.LINK Setup, and then press Select.
4Press the up arrow and down arrow buttons on the remote control to highlight Standby Mode, and then press Select.
5Press the left arrow and right arrow buttons on the remote control to select Active or Inactive, and then press Select.
Active: Power continues to pass through the i.LINK circuit so data can be relayed.
Inactive: Power consumption is minimized during standby mode. Data cannot be relayed at this setting.
6Press the Menu button to view the display.
■When the main power of the TV is in standby mode (Power indicator lights off), i.LINK control commands cannot be received from an i.LINK device. This does not change if the Standby Mode is set to Active. To control the TV from an i.LINK device, turn the TV power on (Power indicator lights up in blue).
■Data cannot be relayed between i.LINK devices when all of the following conditions are met:
1) More than one i.LINK device is connected to the TV with i.LINK cables, 2) Standby Mode is set to Inactive, and 3) The power of the TV is in standby mode (Power indicator lights off). When the TV is connected between two i.LINK devices in series, select Active in Standby Mode or connect the TV at an end of the series as shown in the diagram.
Selecting an i.LINK device
To control an i.LINK device from the TV, you must first choose the i.LINK device to be controlled. One i.LINK device can be chosen from up to 16 i.LINK connected decks. All i.LINK devices connected with i.LINK cables should automatically appear in the selection screen.
1Press the i.LINK button on the remote control to display the i.LINK control panel.
| STOP | 05 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
00:01:32 | PWR |
|
|
|
|
|
|
|
|
|
|
|
| Model | |
|
| STOP |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| Input | ||||||
■If no i.LINK device is detected, the message No i.LINK model is available appears.
■If no i.LINK device is selected, the selection screen appears. Go to step 3.
2Press the arrow buttons on the remote control to highlight Model, and press Select to view the Selection screen.
i.LINK |
| 1/1 [Thu] 1:33AM | ||||||
|
|
|
|
|
| Which model do you use? | ||
|
|
|
|
| Type | Manufacturer | Model | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cancel Connection
3Press the up and down arrow buttons on the remote control to select a device, and then press Select. The control panel for the i.LINK device appears.
■Incompatible devices with this TV do not appear in the selection screen.
■The manufacturer’s name and model name of some devices may not display correctly. Follow the steps in “Deleting registered i.LINK devices” on page 39, and cancel all i.LINK devices you have registered before reconnecting the i.LINK cable.
■
Disabling the TV’s operation of an i.LINK device
By disabling the TV’s operation of an i.LINK device, the device can be operated from another i.LINK device.
