HP LC3700N manual Vii

■Outdoor Antenna Grounding — If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

1

Antenna Grounding

7

6

5

4

3

2

Antenna Grounding

Reference Grounding Component

1Electric Service Equipment

2	Power Service Grounding Electrode System
	(NEC Art 250, Part H)

3Ground Clamps

4Grounding Conductors (NEC Section 810-21)

5Antenna Discharge Unit (NEC Section 810-20)

6Ground Clamp

7Antenna Lead in Wire

■To prevent fire, never place any type of candle or flames on the top or near the TV set.

■To prevent fire or shock hazard, do not expose this product to dripping or splashing. No objects filled with liquids, such as vases, should be placed on the product.

■To prevent fire or shock hazard, do not place the AC power cord under the TV set or other heavy items.

■Turn off the main power and unplug the AC cord from the wall outlet before handling.

■Use a soft cloth and gently wipe the surface of the TV panel. Using a hard cloth may scratch the panel surface.

■Use a soft damp cloth to gently wipe the panel when it is really dirty. (It may scratch the panel surface when wiped strongly.)

■If the panel is dusty, use an anti-static brush, which is commercially available, to clean it.

■To protect the panel, do not use a dirty cloth, liquid cleaners, or chemical cloth to clean it; such materials may damage the panel surface.

■Do not display a still picture for a long time, as this could cause an afterimage to remain.

vii