John Lewis JLTDH15 instruction manual

Page 20

1.Open door in plinth: To do this, press the release button on the right and open the door in the plinth to the left.

2.Pull the filter housing out of the base by the handle.

3.To clean the fluff filter: Remove filter from filter housing. To do this, press the pressure points on the sides and pull the filter frame up and out of the housing. Remove fluff from the fluff filter with a damp hand.

4.Use a damp hand to remove the fluff from the filter in the base . If necessary pull out and clean the filter with warm water using a wiper or brush. Clean the inside of the door, the fluff filter chamber and the rubber seals of fluff. Insert the fluff filter to the base.

5.Insert the fluff filter into the filter housing (it has to audibly lock) and slide it inside the filter chamber. Close the door in plinth. Note: If the fluff filter is not inserted in the filter housing, the filter housing cannot slide into the appliance base.

Image 20

Contents Tumble dryer Important safety information General safetyCause an explosion. Only tumble dry items washed with water InstallationUse Child safety Environmental tipsEnvironmental information Spin the laundry well before dryingPage Contents Adjustable feet Description of the applianceProgramme selector and Off switch Control panelBefore first use Time button Display Dry timeProgramme chart Application/propertiesPreparing laundry Sorting and preparing laundrySorting laundry Switching machine on Daily useDoor opening and laundry loading Selecting the programmeAnti-crease AlarmIntensive Delay start Setting child lockTime Programme of 20 minutesOpen loading door Changing programmeStarting the programme For drying rack unpacking see Installation chapter Drying rackDrying cycle complete / removing laundry Open doorInstallation and use Drying tipsMaintenance and cleaning Cleaning fluff filterCleaning the door seal Emptying the water reservoirCleaning heat exchanger filters Water reservoir has a volume of approx litresPage Clean operating screen and housing Cleaning the drumWhen doing this, please use rubber gloves What to do ifReplacing the drum light Does not Filters not locked in place Into place CloseMachine settings Alarm permanent on/offAdjusting the level of conductivity Replace the defective bulb Screw cover back downTransporting the appliance InstallationTechnical information Removing transport safety packaging Appliance positioningElectrical connection Green and Yellow Earth Blue Neutral Brown LiveSymbol or coloured green and yellow Door reversalDrying rack unpacking Mod Repairs after sales serviceSpare parts Page Page 136916260-B-102011