Cleaning heat exchanger filters
If the warning lamp Condenser lights, the heat exchanger fluff filters in the base of the appliance must be cleaned, i.e. after each 5 drying cycles. Both filters are located in the appliance base.
Water can collect in the filter housing therefore it is normal for the heat exchanger fluff filters to become wet.
Important!
•Never operate the dryer without the fluff filters.
•Clogged filters cause higher energy consumption (drying cycle elongation) and dryer damage.
•A dirty heat pump can only be cleaned up by means of a costly process.
1.Open door in plinth: To do this, press the release button on the right and open the door in the plinth to the left.
2.Pull the filter housing out of the base by the handle.
1 |
2 |
1 |
3.To clean the fluff filter: Remove filter from filter housing. To do this, press the pressure points on the sides and pull the filter frame up and out of the housing. Remove fluff from the fluff filter with a damp hand.
18