John Lewis JLTDC11 instruction manual Cleaning the door seal, Emptying the water reservoir

Page 17

If the fine filter is not fitted, the large mesh filter will not snap into place and the loading door cannot be closed.

Cleaning the door seal

Wipe the door seal with a damp cloth immediately after the drying cycle has finished.

Emptying the water reservoir

Empty the water reservoir after every drying cycle.

If the water reservoir is full, an active programme will break off automatically and the warning lamp Full tank lights. In order to continue the programme, the water reservoir must first be emptied.

Warning! The condensed water is not suitable for drinking or for preparing foodstuffs.

1.Take out drawer containing water reservoir completely 1 and pull up the water reservoir's drainage pipe as far as it will go 2 .

2.

1.

2.Pour the condensed water out into a basin or similar receptacle.

3.Slide the outlet connections in and refit the water reservoir.

If the programme has been interrupted as a result of the water reservoir being full: Press the Start/Pause button to continue the drying cycle.

The water reservoir has a volume of approx. 4 litres.

The condensed water can be used as distilled water, e.g. for steam ironing. However it must first be filtered (e.g. with a coffee filter) to remove any residue and small pieces of fluff.

17

Image 17
Contents Condenser dryer with heat pump General safety Important safety informationUse InstallationEnvironmental information Child safetyEnvironmental tips Page Contents Description of the appliance Control panel Programme selector and Off switchBefore first use Time buttonProgrammes Programme chartPreparing laundry Sorting and preparing laundrySorting laundry Daily use Switching machine onDoor opening and laundry loading Selecting the programmeRemoved at any time during the anti-crease phase AlarmIntensive Anti-creaseSelect the programme and additional functions Delay startSetting child lock Drying cycle complete / removing laundry Starting the programme Changing programme Open door Maintenance and cleaningCleaning fluff filter Clean the entire filter area Emptying the water reservoir Cleaning the door sealCleaning heat exchanger filters Cleaning the drum What to do if Clean operating screen and housingReplacing the drum light Machine settingsAlarm permanent on/off Press the Start/Pause button until you set desired level Adjusting the level of conductivityConsumption values Technical specificationsAppliance positioning InstallationTransporting the appliance Electrical connection Removing transport safety packagingGreen & Yellow Brown Blue Cord Clamp Green and Yellow Earth Blue Neutral Brown LiveMod Repairs after sales serviceDoor reversal Spare parts Page Page Page 136909381-00-102009