Important!
•The appliance should not be installed in an environment such as a unheated garage or outbuilding. The combination of high humidity and low ambient temperatures could affect the performance or the appliance and therefore invalidate your guarantee.
•The hot air emitted by the tumble dryer can reach temperatures of up to 60°C. The appliance must therefore not be installed on floors which are not resistant to high temperatures.
•When operating the tumble dryer, the room temperature must not be lower than +5°C and higher than +35°C, as it may affect the performance of the appliance.
•Should the appliance be moved, it must be transported vertically.
•The appliance must not be installed behind the lockable door, a sliding door a door with a hinge on the opposite side to that of the appliance in such a way that a full opening of the dryer is restricted.
Removing transport safety packaging
Caution! Before use all parts of the transport packaging must be removed.
1.Open loading door
2.Pull off adhesive strips from inside machine on top of drum.
3.Remove foil hose and polystyrene padding from the machine.
Warning! If the appliance was not transported in an upright position, leave it to stand for 12 hours before connecting it to the electricity supply and using it for the first time, so that the oil can flow back to the compressor. Otherwise the compressor could be damaged.
Electrical connection
Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.
25