John Lewis JLTDC11 Daily use, Switching machine on, Door opening and laundry loading

Page 11

Daily use

Switching machine on

Turn the programme selector to any programme. The machine switches on. When the loading door is open, the internal lamp illuminates the drum.

Door opening and laundry loading

1.Open loading door:

Push against the loading door (push point)

2. Load your laundry (do not force it in).

Caution! Do not jam laundry in between the loading door and rubber seal.

3.Close loading door securely. Lock must audibly lock.

Selecting the programme

Use the programme selector to set the programme you require. The estimated time to end of the programme appears in the LCD in h:mm format (hours:minutes).

During the cycle time elapses by steps of one minute; less than 1 hour the leading zero is not shown (e.g. “59”, “5”, “0”).

Extra delicate

Extra delicate cycle is a programme specially designed for drying sensitive fabrics with the care label and for temperature-sensitive textiles (e.g. acrylic, viscose). The programme is executed with reduced heat. To activate it:

1. Choose the drying programme.

2.Press the Extra delicate button - the LED above is on.

11

Image 11
Contents Condenser dryer with heat pump General safety Important safety informationUse InstallationEnvironmental information Child safetyEnvironmental tips Page Contents Description of the appliance Time button Programme selector and Off switchControl panel Before first useProgrammes Programme chartPreparing laundry Sorting and preparing laundrySorting laundry Selecting the programme Switching machine onDaily use Door opening and laundry loadingAnti-crease AlarmRemoved at any time during the anti-crease phase IntensiveSelect the programme and additional functions Delay startSetting child lock Drying cycle complete / removing laundry Starting the programmeChanging programme Open door Maintenance and cleaningCleaning fluff filter Clean the entire filter area Emptying the water reservoir Cleaning the door sealCleaning heat exchanger filters Cleaning the drum What to do if Clean operating screen and housingReplacing the drum light Machine settingsAlarm permanent on/off Press the Start/Pause button until you set desired level Adjusting the level of conductivityConsumption values Technical specificationsAppliance positioning InstallationTransporting the appliance Electrical connection Removing transport safety packagingGreen & Yellow Brown Blue Cord Clamp Green and Yellow Earth Blue Neutral Brown LiveMod Repairs after sales serviceDoor reversal Spare parts Page Page Page 136909381-00-102009