John Lewis JLWM 1604 instruction manual Select the desired options, Select the delay start

Page 14

Pressing the corresponding buttons to change those values. The green pilot light of the button 9 starts flashing.

The dial can be turned either clockwise or counterclockwise. Turn to position «Off» to reset programme/Switching the machine off.

At the end of the programme the selector dial must be turned to position «Off» , to switch the machine off.

Caution! If you turn the programme selector dial to another programme when the machine is working, the red pilot light of button 9 will blink 3 times to indicate a wrong selection. The machine will not perform the new selected programme. The message Err is displayed for a few seconds. The machine will not perform the new selected programme.

Select the spin speed or the available functions

Press button 4 repeatedly to change the spin speed if you want your laundry to be spun at a speed different from the one proposed by the washing machine.

You can also choose «No Spin» («0»), «Rinse Hold » or «Quiet» function. The display will show the corresponding description.

Select the desired options

Press the relevant buttons to select the available options. Depending on the programme, different options can be selected together. These must be selected after choosing the desired programme and

before pressing the «Start/Pause» button. If an option which is not compatible with the set wash programme is selected, the red Start/Pause light flashes 3 times and the message Err is displayed for a few seconds. When the option is set, it will appear in the relevant rectangle on the display or the relevant symbol icon will be displayed.

For the compatibility among the washing programmes and the options see chapter «Washing Programmes».

Select the delay start

Before you start the programme, press this button repeatedly to select the desired delay. The set delay time value (up to 20 hours) will appear on the display for a few seconds, then the duration of the programme will appear again. The wash programme can be delayed from 30 min - 60 min - 90 min, 2 hours and then by 1 hour up to a maximum of 20 hours.

You can cancel the delay time at any moment, before you press the «Start/ Pause» button.

Selecting the delayed start

You must select this option after you have set the programme and before you press the «Start/Pause» button.

•Select the programme and the required options.

•Select the delay start.

•Press button 9: the machine starts its hourly count down. The programme will start after the selected delay has expired.

Opening the door throughout the delay time

If you wish to add laundry in the machine during the delay time

•Press button 9 to put the machine in pause.

•Add the laundry, close the door

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Jlwm Spin washing machine Safety information General safetyInstallation UseChild safety Keep all detergents in a safe place out of children’s reachContents Page Product description Control panel Detergent dispenser drawerEasy Iron Programme DialSpin Extra RinseQuick Delay StartDisplay Start PauseChild lock symbol Personalisation Acoustic signalsFirst use Child lockMeasure out the detergent Daily useLoad the laundry Select the required programmeOpening the door throughout the delay time Select the delay startSelecting the delayed start Select the desired optionsHow to open the door during the cycle of a programme How to change an option or a programme during its cycleHow to interrupt a programme Cancelling the delayed startSorting out the laundry Helpful hints and tipsEnd of programme Before loading the laundryQuantity of detergent to be used Removing stainsDetergents and additives Ball point pen and glue moisten withWashing programmes Degrees of water hardnessWhite and colour cotton normally soiled items White or fast colour cotton normally or slightlyWhite or non fast colour cotton slightly soiled Delicates AutomaticColour cotton and synthetic items can be SilkMaximum spin speed at Spin phase, add more items, redistribute the loadMain wash Rinses Max. load 2 kgMinute wash DrainSpin OffProgramme1 Energy consumption Water consumption KWh2 Litre2 Technical dataConsumption values Care and cleaning Washing drum Cleaning the drawer recessCleaning the pump Door sealPage Cleaning the water inlet filters Frost precaution Emergency emptying outInstallation UnpackingPositioning and levelling PlumbingWater inlet Water-stop deviceOnto a sink outlet spigot Water drainageInto a drainage standpipe Special conditions Interest of the environmentElectrical connection Appliance is supplied with a 13 amp plug fitted Permanent connectionWashing machine Problem Possible cause/SolutionWhat to do if… Does not startEmpty and/or does not Machine does not fillMachine does not Machine fills thanDoor will not open Unsatisfactory washingResults Machine vibratesSpare parts Repairs After Sales ServiceRepairs After Sales Service 0844 871Ecological hints Environment concernsPackaging materials Page Page Page 132944071-A-102011
Top Page Image Contents