John Lewis JLWM 1604 instruction manual Installation, Unpacking

Page 29

Installation

Unpacking

All transit bolts and packing must be removed before using the appliance.

You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again.

1.After removing all the packaging, carefully lay machine on it’s back to remove the polystyrene base from the bottom.

2.Remove the power supply cable and the draining and inlet hose from the hose holders on the rear of the appliance.

3.Unscrew the three bolts.

4.Slide out the relevant plastic spacers.

Image 29

Contents Jlwm Spin washing machine General safety Safety informationUse InstallationKeep all detergents in a safe place out of children’s reach Child safetyContents Page Product description Detergent dispenser drawer Control panelSpin Programme DialEasy Iron Extra RinseDisplay Delay StartQuick Start PauseChild lock symbol First use Acoustic signalsPersonalisation Child lockLoad the laundry Daily useMeasure out the detergent Select the required programmeSelecting the delayed start Select the delay startOpening the door throughout the delay time Select the desired optionsHow to interrupt a programme How to change an option or a programme during its cycleHow to open the door during the cycle of a programme Cancelling the delayed startEnd of programme Helpful hints and tipsSorting out the laundry Before loading the laundryDetergents and additives Removing stainsQuantity of detergent to be used Ball point pen and glue moisten withDegrees of water hardness Washing programmesWhite and colour cotton normally soiled items White or fast colour cotton normally or slightlyWhite or non fast colour cotton slightly soiled Colour cotton and synthetic items can be AutomaticDelicates SilkMain wash Rinses Spin phase, add more items, redistribute the loadMaximum spin speed at Max. load 2 kgSpin DrainMinute wash OffProgramme1 Energy consumption Water consumption KWh2 Litre2 Technical dataConsumption values Care and cleaning Cleaning the pump Cleaning the drawer recessWashing drum Door sealPage Cleaning the water inlet filters Emergency emptying out Frost precautionUnpacking InstallationPlumbing Positioning and levellingWater-stop device Water inletOnto a sink outlet spigot Water drainageInto a drainage standpipe Interest of the environment Special conditionsElectrical connection Permanent connection Appliance is supplied with a 13 amp plug fittedWhat to do if… Problem Possible cause/SolutionWashing machine Does not startMachine does not Machine does not fillEmpty and/or does not Machine fills thanResults Unsatisfactory washingDoor will not open Machine vibratesRepairs After Sales Service Repairs After Sales ServiceSpare parts 0844 871Ecological hints Environment concernsPackaging materials Page Page Page 132944071-A-102011