LG Electronics 3600 operation manual Striping Tip Guide, Striping TIP, Orifice Size Inches

Striping Tip Guide

Rev-Tipfor Striping
	TM
Fan Width (6” from surface)
in	(mm)
1-2	25-51
2-4	51-102
4-6	102-152
6-8	152-203
Striping Paint

	STRIPING TIP			- ORIFICE SIZE Inches
					(	)
.009	.011 .013	.015	.017	.019 .021	.023	.025	.027 .031	.035
	113ST	115ST	117ST	119ST
		215ST	217ST 219ST 221ST
		315ST	317ST 319ST 321ST
	Oil Base Oil Base		Latex	Latex Latex	Latex	Latex	Latex

Water Flow Rate	(gpm)
(water @ 2000psi, 138 bar)	(lpm)
Paint Flow Rate	(gpm)
(latex paint @ 2000psi,	(lpm)
138 bar/1.36 spec. gr.)
Pump Minimum	(gpm)
*	(lpm)
Output
*Pump will support tip worn to next larger size.

.12	.18	.24	.31	.38	.47	.57	.67	.77	1.03	1.31	1.63	1.80
.49	.69	.91	1.17	1.47	1.79	2.15	2.54	2.96	3.90	4.98	6.17	6.81
.10	.15	.21	.27	.33	.40	.49	.58	.66	.88	1.12	1.39	1.54
.38	.57	.79	1.02	1.25	1.51	1.85	2.20	2.50	3.33	4.24	5.26	5.83
.25	.25	.33	.40	.50	.60	.75	.88	1.0	1.25	1.5	2.0	2.2
1.0	1.0	1.25	1.5	1.9	2.3	2.8	3.3	3.8	4.7	5.7	7.5	8.2

REV-TIP			M	for	Striping
		T
P.N. 562-xxxST
Includes Rev-Tip	TM	, Metal Seal
& O-Ring Seal.
Sample:				1/2 Fan Width
560-215
REV-TIP				Orifice Size
TM

REV-GUARDTMSuper Compact P.N. 561-00111/16-16 “F” Thread. Fits: Airlessco, and some ASM, Wagner, and Campbell Hausfeld.

P.N. 561-002 7/8-14 “G” Thread. Fits some: Graco, Wagner, Titan, Airlessco.

Striping Tips should not be used for regular spraying. Striping tips are designed for a single pass application, while spray tips are designed for the 1/3 overlap technique used for spray painting.

Spray Tip Replacement: During use high pressure will cause the orifice to grow larger. This destroys the flat spray pattern or will leave tailing or two heavy lines on the outside of the pattern. When this ocurs replace the spray tip or excessive paint will be wasted.

REGULAR PAINTING SPRAY TIP STRIPING TIP

LIGHT

28

HEAVY LIGHT

UNIFORM PATTERN