H ow to use washer
Child lock
If you choose to lock the buttons on the control assembly to prevent tampering, this function may be selected.
•Child lock can be set by pressing and holding the Option and Rinse button simultaneously. (About three seconds)
•When child lock is set, all buttons are inoperable except for power button.
•To deactivate Child lock system, press and hold the Option and Rinse button simultaneously again.
(About three seconds)
•To change to the desired program, whilst in child lock mode.
1. Press and hold both Option and Rinse button to cancel the child lock.
(About three seconds)
2. Press the Start/Pause button.
3. Select the desired program and press the Start/Pause button again.
Change
the desired 
program
•The child lock can be set at any time and it is automatically canceled when operational errors occur.
Rinse
• By pressing the Rinse button, the Rinse type can be selected.
-Normal
-Rinse+
-Rinse++
-Normal+Hold
- Rinse++Hold
1.Normal
•Baby Care performs 4 Rinse
•Cotton, Synthetic, Wool, Duvet performs 3 Rinses
•Cotton Quick, Delicate, Hanwash, Quick 30 performs 2 Rinses.
2.Rinse+ & Rinse++
•Used to additional rinse, which may assist in removing traces of detergent residue.
•By selecting Rinse+ or Rinse++ function, the Rinse Time and the Rinse water are increased.
3.Normal+Hold & Rinse++Hold
•Is selected by pressing the Rinse button repeatedly this function leaves clothes in the washer; suspended in the water after a rinse without entering into spin.
•To proceed to a Drain or Spin function after a Rinse hold, select Drain on the program dial or press the Spin button for the desired speed, then press the Start/Pause button.
The matching indicator lamp will light up for identification.
19